Sensing targeted tumor markers with high sensitivity provides vital information for the fast diagnosis and treatment of cancer patients. A vascular endothelial growth factor (VEGF165) have recently emerged as a promising biomarker of tumor cells. The electrochemical aptasensor is a promising tool for detecting VEGF165 because of its advantages such as a low cost and quantitative analysis. To produce a sensitive and stable sensor electrode, nanocomposites based on polyaniline (PANI) and carbon nanotube (CNT) have potential, as they provide for easy fabrication, simple synthesis, have a large surface area, and are suitable in biological environments. Here, a label-free electrochemical aptasensor based on nanocomposites of CNT and PANI was prepared for detecting VEGF165 as a tumor marker. The nanocomposite was assembled with immobilized VEGF165 aptamer as a highly sensitive VEGF165 sensor. It exhibited stable and wide linear detection ranges from 0.5 pg/mL to 1 μg/mL, with a limit of detection of 0.4 pg/mL because of the complementary effect of PANI/CNT. The fabricated aptasensor also exhibited good stability in biological conditions, selectivity, and reproducibility after several measurement times after the dissociation process. Thus, it could be applied for the non-invasive determination of VEGF, in biological fluid diagnosis kits, or in an aptamer-based biosensor platform in the near future.
This study discusses a new coating method to protect 316L stainless steel (SS) from pitting corrosion in high chloride environments. The SS surface was coated using a simple, eco-friendly method, and sunflower oil (SunFO) was used as a base coating and binder for molybdenum disulfide (MoS2). The coated surface was observed using scanning electron microscopy (SEM) with an energy dispersive spectrometer (EDS) and X-ray diffraction (XRD). Corrosion behavior was examined by open-circuit potential (OCP) measurement and electrochemical impedance spectroscopy (EIS) in an 3.5% NaCl solution. The SunFO coating with MoS2 showed the highest corrosion resistance and coating durability during the immersion time relative to the SunFO coating and bare 316L SS. The increased corrosion resistance is thought to be because of the interactions with the aggregations of the SunFO lamellar structure and MoS2 in the coating film, which acted as a high order layer barrier providing protection from the metals to electrolytes.
12 July 2017 in Metals and Materials International