A proper understanding of the change characteristics of negative drainage pressure along a drilling hole is essential since gas drainage parameters are the key parameters that influence the efficiency of gas drainage. In this study, based on the coupling of gas seepage from coal seams and the gas flow along the drilling hole, a theoretical model was established to calculate the gas pressure change law along the drilling hole with different influencing factors. Subsequently, a multibranch method was applied to test the negative pressure at different drilling holes. Finally, a field test was conducted in the Jiulishan coal mine to analyze the changed characteristics of the negative drainage pressure along the drilling hole. The results show that at a constant negative drainage pressure in the borehole, the negative pressure gradually decreased with increasing depth. With an increase in negative drainage pressure at the borehole, the negative pressure loss for every 100 m substantially increased. The gas flux had the most obvious influence on the negative pressure in the drilling hole, and the pressure loss rapidly increased with increasing gas flux. When the diameter of the borehole was small, the negative pressure loss was significant; when the drilling hole was deep, the negative pressure decreased more significantly. This study has important theoretical and practical significance for improving the gas drainage effect.
To investigate the characteristics of gas pressure changes during the freezing of gas-containing composite coal, an experimental device for determining the freezing response characteristics of gas-containing coal was independently designed. Coal samples with different firmness coefficients from the No. 3 coal seam in Yuxi Coal Mine in Jincheng, Shanxi Province, were selected to determine the different freezing response characteristics. The gas pressure evolved under different temperatures (-10 °C-15 °C-20 °C-25 °C-30 °C) and different adsorption equilibrium pressures (1.0 MPa, 1.5 MPa, 2.0 MPa). The research results reveal that, during the freezing process of the gas-containing coal sample, the gas pressure in the coal sample tank changed as a monotonously decreasing function and underwent three stages: rapid decline, decline, and slow decline. The relationship between the gas pressure of the coal sample tank and the freezing time is described by a power function. Low temperatures promoted gas adsorption. As the freezing temperature decreased, the decrease of gas pressure in the coal sample tank became faster. During the freezing process, the adsorption capacity of soft coal was larger, and the gas pressure of soft coal was lower.
To explore the evolution of characteristics and trends of fractures in gas-bearing coal, in situ computed tomography scanning experiments were performed on coal samples under different gas pressures and applied loads. The spatial distribution of fractures in computed tomography images of coal samples was visualized by using image analysis and processing software. Furthermore, the internal fracture structure of gas-bearing coal was analyzed qualitatively and quantitatively using grayscale statistical theory and fractal theory, respectively. The results of this study indicated that during the whole stress–strain process of gas-bearing coal, the pixel ratios of two-dimensional and three-dimensional fractures showed three stages: slow decline, slow growth, and rapid growth. For the statistical characteristics of computed tomography scan gray images, the contrast first decreased and then increased, while the correlation, energy, and homogeneity first increased and then decreased. In addition, in the whole loading stage, the fractal dimension of coal samples decreased first and then increased with the increase in strain value, while the Euler number was just the opposite. Significantly, after the failure of gas-bearing coal, the peak strength, elastic modulus, and Euler number decreased linearly with increasing gas pressure, and the intricacy and interconnection of the fracture network improved. The results furnish a vital understanding of gas drainage from coal seams and safe operation of coal mines.
26 May 2026 in International Journal of Damage Mechanics
Crack propagation in gas-bearing coal–rock bodies under dynamic disturbance plays a crucial role in coal mine safety. Impact-induced damage can significantly alter the permeability of coal–rock strata, thereby increasing the risk of gas-related hazards. In this article, the dynamic crack propagation and permeability jump characteristics of gas-bearing coal–rock combinations under different strain rate loading conditions were systematically investigated. Triaxial dynamic compression experiments were conducted to obtain the stress–strain responses and permeability evolution patterns of the samples. Further analysis of the failure modes and crack types of the coal–rock combination was conducted using industrial computed tomography scanning equipment, and the three-dimensional crack network was reconstructed. On this basis, a fractal seepage model was developed by integrating the pore network modeling approach. And the intrinsic mechanism underlying the permeability jump in gas-bearing coal–rock combinations is clarified. The results indicate that the dynamic stress–strain curve of coal–rock combinations exhibits dual linear elastic characteristics and elastoplastic instability behavior. The dynamic mechanical response of coal–rock combinations demonstrates pronounced strain-rate dependence. The cracks in the coal–rock combination are induced by compressive-shear failure, tensile-strain failure, and unloading failure, respectively. The crack propagation and failure extent in coal–rock combinations become increasingly severe with rising strain rates. The continuously increasing crack spatial complexity directly leads to a permeability jump. Relative to quasi-static compression failure, the coal–rock combination subjected to dynamic compression failure exhibits gas seepage hysteresis prior to the permeability jump.