29 August 2022 in ACS Omega
Arsenic is a kind of element widely distributed in the environment that may pose a threat to the ecological environment and human health, while effective remediation and sustainable utilization of arsenic-containing sludge is a challenge. Based on stabilization/solidification blast furnace slag-based cementitious materials (BCMs), this study innovatively proposes to improve the arsenic (As) solidification efficiency and long-term stability by using the activation mode of CaO and NaCl. The effects of different factors on the properties of the BCM were measured by unconfined compressive strength (UCS) tests, X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. The long-term stability and safety of the BCM were verified by leaching toxicity and improved three stage continuous extraction method (BCR) tests. Experimental results show that the addition of CaO provides conditions for the formation of ettringite (AFt), thus promoting the crystal growth of AFt. The addition of NaCl can promote the formation of Cl-AFt and play a good long-term stabilizing role. When the content of the alkali activator is 10% and the modulus is 1.0, the contents of CaO and NaCl are 10 and 1%, respectively. The BCM has the best efficiency in terms of UCS and As solidification. The UCS at 28 days was 5.4 MPa, and the leaching concentration of As was 0.309 mg/L, and the As solidification efficiency was up to 99.9%. In the improved BCR test, the proportions of residual and oxidizable states of arsenic increased by 19.6 and 13.5%, respectively, and the stability of heavy metals improved. These findings show that the BCM has good long-term stability and safety. Overall, this study shows that CaO and NaCl significantly increase the output of AFt and achieve the purpose of efficient and stable solidification of As by the BCM.
1 July 2025 in Waste Management & Research: The Journal for a Sustainable Circular Economy
Alkali-activated cementitious materials, as clean materials with low energy consumption and low CO 2 emissions, have broad application prospects in the field of solid waste grouting. This article categorizes and introduces commonly used grouting materials, analyses their physicochemical properties and reaction mechanisms and provides theoretical and practical bases for further research and application of solid waste grouting technology. Comprehensive analysis of existing research shows cement grouting materials and chemical grouting materials can adapt to many engineering conditions. However, the production of cement consumes resources and emits a large amount of CO 2 . Chemical grouting has been discontinued in many engineering projects due to its prohibitive cost, weak universality, toxicity and other factors. Alkali-activated industrial solid waste is used to prepare grouting materials, which consumes a large amount of industrial solid waste while reducing CO 2 emissions. Different additives can be included according to engineering needs to improve various performances and can be widely used in various construction projects, better supporting carbon neutrality and carbon peak goals.