Additive manufacturing accesses far-from-equilibrium solidification regimes that enable alloy amalgamation—the direct combination of commercial alloys to create new compositions and microstructures. Here, we investigate dissimilar amalgamation of Ti-6Al-4V with up to 4.5 wt.% 316L stainless steel by laser powder bed fusion. Operando synchrotron X-ray diffraction and multiscale electron microscopy reveal that dissimilar melting and incomplete mixing generate β-stabilizer-rich chemical heterogeneity across multiple length scales. These compositional variations promote spatially varying transformation pathways: β-stabilizer-rich regions retain β, whereas intermediate β stabilization promotes metastable α″ formation under rapid cooling. The resulting microstructure comprises refined α′/α laths coexisting with retained β and locally formed α″. These findings establish a mechanistic link between incomplete mixing, local composition, and phase selection during dissimilar alloy amalgamation and demonstrate controlled mixing of commercial powders as a pathway for engineering heterogeneous, multiphase titanium alloys under additive manufacturing conditions.
28 September 2021 in REVISTA DE INNOVACIÓN Y TRANSFERENCIA PRODUCTIVA
Surgical sutures are the simplest yet most used medical devices in modern healthcare, they are the preferred type because of its biocompatibility and ability to be resorbed. Bovine intestinal fibers are converted into catgut that serves as the starting material of absorbable surgical suture threads. The mechanical and control subsystems of industrial equipment were designed to automate disinfection of bovine intestinal fibers to increase efficiency during the wet process stage of disinfection without altering its fiber quality. A turbulent regime of the water and disinfectant mix was designed, implemented and validated, this automatic aeration system in the disinfection thank increased the process efficiency by reducing the time used to handle a load of fibers by 50%, and the working time of the personnel involved in the process was reduced from 220 to 20 minutes. Tests on the final product showed that LAL levels comply with what is established by the American Pharmacopoeia: USP Bacterial Endotoxin Test and USP Medical Devices - Bacterial and Pyrogen Endotoxin Test. These results indicate that the disinfected catgut using the proposed automated system complies with all mechanical quality control tests.
Additive manufacturing accesses far-from-equilibrium solidification regimes that enable alloy amalgamation—the direct combination of commercially available alloys during processing to create new compositions and microstructures. Here we investigate dissimilar amalgamation of Ti-6Al-4V with up to 4.5 wt.% 316L stainless steel by laser powder bed fusion to resolve the origins of heterogeneous microstructure formation during alloy mixing. Using operando synchrotron X-ray diffraction at the Advanced Photon Source together with multiscale electron microscopy, we show that dissimilar melting and incomplete mixing generate β-stabilizer–rich chemical modulations that localize at melt-pool boundaries and within the solidified microstructure. These modulations suppress the local β-transus and promote spatially varying transformation pathways: β-stabilizer–rich regions stabilize retained β, whereas intermediate β-stabilization enables a β→α″ martensitic transformation under rapid cooling. The resulting microstructure comprises refined α′/α laths coexisting with retained β and locally formed α″—a phase assemblage not accessible through conventional processing of Ti-6Al-4V. This work provides mechanistic insight into phase selection in dissimilar alloy mixtures under AM conditions and establishes controlled mixing of off-the-shelf powders as a route to engineer heterogeneous, multiphase titanium alloys.