22 June 2021 in Materials Science Forum
In this paper, based on the life cycle concept of oil sludge waste from the NdFeB manufacturing process, we investigate the process technology route to recover valuable elements from the oil sludge waste by hydro-metallurgical refining and calcium reduction to fabricate a sintered NdFeB magnet. The life cycle list was calculated and the environmental impact of the main processes was examined using the ReCiPe method, and the main factors of environmental impact were identified. The results showed that the hydrometallurgical technology route, compared with the calcium reduction technology route, resulted in 119.84% of human health hazards, 119.84% of ecological damage and 119.84% of resource. The consumption was found to be 13.08% higher than that of FDP. The sensitivity analysis revealed that the production of hydrochloric acid is highly sensitive to FDP, and power consumption is high to WTP in the hydrometallurgical technology route, and WTP in the calcium reduction unit process, and HTP in all processes in the calcium reduction technology route. The overall results show that reducing the environmental impact in the calcium reduction recovery process and accelerating the clean production of China's power resources are of great significance for the recovery of oil sludge waste for the preparation of recycled sintered NdFeB.
6 September 2017 in Journal of Spectroscopy
The friction-reducing performance of surfaces with regular nanotextures is a key topic in surface engineering research. This paper presented a simple, easily controlled method for fabricating regular nanotextures on an electrodeposited Ni-Co alloy. The electronic controlling on the friction performance of a nanotexured surface was investigated by AFM. The results showed that the frictional force of a nanotexured surface can be controlled by an external electric field. Before laser processing, the friction initially increased with the bias voltage and then decreased after the bias voltage exceeded 1.0 V. Its friction forces can be changed more than 2 times under the different external electric field. After laser processing, the trend of the frictional force was reversed and its friction forces changed more than 12 times for the laser-processed sample with 0.18 J/cm2 laser power. The results also showed that the friction force decreased when using different nanotextures in an external electric field.