1 July 2015 in Journal of Sound and Vibration
1 February 2013 in Advances in Engineering Software
15 May 2017 in Journal of Tribology
This work presents an exact and general model order reduction (MOR) technique for a fast finite element resolution of elastohydrodynamic lubrication (EHL) problems. The reduction technique is based on the static condensation principle. As such, it is exact and it preserves the generality of the solution scheme while reducing the size of its corresponding model and, consequently, the associated computational overhead. The technique is complemented with a splitting algorithm to alleviate the hurdle of solving an arising semidense matrix system. The proposed reduced model offers computational time speed-ups compared to the full model ranging between a factor of at least three and at best 15 depending on operating conditions. The results also reveal the robustness of the proposed methodology which allows the resolution of very highly loaded contacts with Hertzian pressures reaching several GPa. Such cases are known to be a numerical challenge in the EHL literature.
22 April 2010 in Journal of Vibration and Acoustics
We investigate the use of cable tension for active vibration control in frame structures. A general formulation for this class of systems is developed using finite elements, which includes the dynamics of the structure and the effects of cable-structure interactions. It is found that the cable tension has two distinct effects on the structure. The first is a parametric effect in which the cable tension changes the stiffness of the structure, and the second is a direct effect that provides an external force on the structure. Based on this model, a general control scheme is developed that uses cable actuation to take advantage of these effects, both separately and together. The control scheme for all cases is based on modal amplitudes, and it applies and releases tension in such a manner that vibration energy is removed from the modes of the structure over a prescribed frequency range that depends on the bandwidth(s) of the actuator(s). The stability of the controlled systems is proven using nonlinear control theory. In addition, a method is developed for determining the optimal placement of cables for parametric stiffness control, which is verified via simulations. Finally, an experimental realization of the direct force control is tested on a frame structure and compared with simulations, demonstrating its effectiveness.
6 April 2022 in Nonlinear Dynamics