6 June 2017 in Journal of Infrared, Millimeter, and Terahertz Waves
10 September 2014 in Journal of Electromagnetic Waves and Applications
This paper describes the design based on a Multiphysics simulation for a waveguide X-Band Fin Taper (FT) Spatial Power Combiner. The proposed device uses Fin Lines to microstrip transition (FLuS) to convert the energy from a rectangular waveguide (WG) TE10 fundamental mode to a microstrip (μS) transmission line (TL) quasi-TEM (q-TEM) mode, in order to be amplified by Solid-State Power Amplifiers. An alteration of the electromagnetic behavior can be produced by the temperature increase and the geometrical displacement induced by the thermal expansion of the structure due to the power dissipation of the MMIC amplifiers. A proper multiphysics model is proposed to select materials and shapes of the probes and their support (carrier), considering the thermo-mechanical operative condition. A virtual prototyping technique is proposed: electric field and S-parameters’ computation in such critical conditions are shown. The proposed study has allowed for the proper thermo-mechanical design for such amplifiers; hence, best materials and technologies have been chosen.
1 January 2013 in Progress in Electromagnetics Research C
A broad-band transmission line spatial power combiner\ud (SPC) is proposed in this paper, which uses a square coaxial (Squarax)\ud transmission line (TL). This structure has some advantages over the\ud traditional circular coaxial spatial power combiner, which have been\ud described in this paper. Fin-Line to microstrip transitions are inserted\ud into the Squarax TL, in order to allow an easy integration of Monolithic\ud Microwave Integrated Circuit (MMIC) Solid State Power Ampli¯er\ud (SSPA). The Squarax SPC geometry allows the feeding of a higher\ud number of MMIC than in a Waveguide SPC, so that this structure\ud ensures high power outputs and small sizes, together with theoretical\ud DC frequency cut-off. In this work, the design and simulation of a\ud passive 4-18 GHz Squarax SPC are reported
28 September 2016 in Advanced Electromagnetics
This paper deals with a broadband TE10 to TE20 mode transformer in a WR90 rectangular waveguide with more than 35 dB suppression of the fundamental mode and only 0.4 dB of maximum transformation loss. Two fin lines are employed with appropriate configuration in order to obtain a broadband mode transformation.
22 October 2017 in Advanced Electromagnetics
A Spatial Power Combiner is proposed using an innovative waveguide to microstrip transition capable to divide the electric field in six equal parts per card. This device can combine 12 MMIC Solid State Power Amplifiers in the whole X Band with 13 dB of return loss and only 2.2 dB losses in a small size, high power and high efficiency system.