9 May 2019 in Microsystem Technologies
With the concept of advanced intelligent transportation systems, the integration of data with technology underway with internet of things brings the concept of always connected and cognizant vehicles as an application area. The major constituents of internet of things are connection, convergence, convenience and the connected car. Road safety and vehicular infotainment are the most emerging issues for the automakers in this regard. Implementation of vehicular safety in urban lanes requires vehicle to vehicle sensing and data communication simultaneously. Because of operation spectrum scarcity, the requirement of vehicle to vehicle sensing and communication on a single platform simultaneously empowered with cognitive radio would be cost efficient. Dynamic Spectrum Access based integrated radar sensing and wireless communication transceiver is demonstrated in this work. In the proposed hardware model a direct sequence spread spectrum radar transceiver and an non contiguous orthogonal frequency division multiplexing communication transceiver is used.
10 July 2020 in International Journal of Communication Systems
1 January 2020 in Telecommunications and Radio Engineering
The article proposes a design and comparison of a different configuration of microstrip patch antenna array (MPA). The comparison was done between a single element patch and 2×2 (4 elements) patch antenna array. Both the configuration contains a microstrip patch antenna on the inset feed type. The designs were compared based on the study of the overall gain of the array configuration, reflection coefficient, VSWR, current distribution, and radiation pattern. From the above-said comparison, the author claims that with the increase in the number of antennae in an array configuration, there is a considerable increase in the gain and decrease in the beam-width. The approach can be termed as beamforming as well. The idea of beamforming says that with the increase in the number of antennas, the resulting beam will show the greater magnitude and lesser beam-width which is exactly matching with the proposed work in this article. To achieve this there are two methods viz. digital and analog beamforming. The approach followed in this paper is analog beamforming. The design was carried at 3.5 GHz on a substrate of type epoxy having a dielectric constant of 4.4.