Direct current (DC) gas insulated transmission lines (GILs) have been widely used in power transmission but might be threatened by partial discharge due to the presence of floating impurities (e.g., dust and metal particles) inside the sealed chamber. In this Letter, by using a 2D fluid model, we characterize the microscopic properties of the partial discharge induced by a floating linear metal particle in SF6 (both the discharge propagation and interaction between space charge and metal particle) under negative high voltage direct current conditions. Due to the strong electronegativity of SF6, the spatiotemporal distributions of the charged species (electrons, positive ions, and negative ions), space charge, and reduced electric field are rather different from those in air. Notably, a negative ion region is observed around the top tip of the metal particle, and it plays an important role in the generation and propagation of primary and secondary streamers in SF6, which may lead to severe motion characteristics of the particle and aliasing of partial discharge signals. Additionally, we analyze the charging process and electric force reversal phenomenon, which may provide a more precise understanding of the underlying mechanisms of the firefly motion previously reported for DC GILs.
In this work, a parallel-rod dielectric barrier discharge (DBD) operating in atmospheric air is investigated through the two-dimensional plasma fluid model. The effects of applied voltage (Vp), secondary electron emission coefficient (γ), and photoionization are examined. Photoionization can significantly influence streamer dynamics by accelerating and broadening both volumetric and surface streamers and enhance the impact of the applied voltage. Without photoionization, the propagation distance of the surface streamer along the curved dielectric surface is limited to 0.1–0.2 mm under applied voltages of 8–8.5 kV. In contrast, with photoionization, this distance can extend to 0.3–0.6 mm. Achieving the same distance requires much higher voltages (10–11 kV) if without photoionization. The “double-layer” structure of the surface streamer is investigated, revealing that γ predominantly affects the surface branch with little impact on the volumetric branch. The critical charge density for streamer onset is found to be about 1018 m−3, and the volume-to-surface streamer transition is attributed to the lateral electric field provided by the space charges. This work provides insights into the regulation strategies and underlying mechanisms of streamer dynamics in parallel-rod DBDs in atmospheric air.
27 March 2025 in Journal of Vacuum Science & Technology A
Atmospheric pressure plasma jets have been studied extensively in recent years because of their wide range of applications in biomedicine, surface treatments, and material processing. In this work, a two-dimensional simulation study is carried out to compare the axisymmetric discharge device configuration on the fundamental characteristics of an atmospheric pressure plasma jet and delivery dose of charged particle fluxes to the substrate surface. The plasma jets are ignited by inserting a high-voltage needle electrode inside a quartz tube containing a grounded ring electrode (single dielectric material device) or by inserting the high-voltage needle electrode inside a one-end closed quartz tube, which is inside a quartz tube containing a grounded electrode (double dielectric material device). Simulation results of the electron density and electric field show that the single dielectric material device induces a stronger discharge than that of the double dielectric material device with significantly faster propagation of plasma bullet toward to the dielectric substrate. These characteristics of the plasma jet generated by the single dielectric material electrode are accompanied with a higher dose of charged particles delivered to the substrate surface. Shielding of the high-voltage needle electrode in the double dielectric material electrode device can reduce the potential, which, in return, reduces the electric field in the jet channel, and, thus, both the jet velocity and charged particle fluxes to the substrate surface are reduced. In addition, the reduction in the distance between the high-voltage needle electrode and the grounded ring electrode in the double dielectric material device has both double-side effects on the fluxes of the charged particles transported to the substrate surface.