9 February 2024 in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
In order to explain the wheel-rail stick-slip vibration phenomenon of alocomotive in a curve, a co-simulation dynamic model taking into account adhesion control was established to reproduce the locomotive wheel-rail curve stick-slip vibration behavior, and the effect of parameters such as creep threshold, descent slope, rail surface condition and track curve radius on the stick-slip vibration behavior was measured by the traction force and the overall dispersion of adhesion coefficient. The results illustrate that the wheel-rail curve stick-slip vibration is caused by the dynamic traction force fluctuation under the adhesion control, and the increase of creep threshold will lead to the decrease of tractive force fluctuation amplitude and the decrease of stick-slip vibration intensity, which will increase the adhesion utilization rate, However, the increase of descent slope, the decrease of track curve radius and wheel-rail friction coefficient have the opposite effect on stick-slip vibration behavior. This phenomenon can be eliminated by improving the rail surface condition, expanding the track curve radius and lowering the locomotive traction force.
5 April 2023 in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
In vehicle dynamics research, a dynamics model is essential, as it provides the basis for the demonstration of early system design of vehicle as well as the verification and optimization of the dynamics performance of the final product. To promote the development of a permanent magnet (PM) Electrodynamic Suspension (EDS) in a maglev train, research was carried out in order to explore a fast dynamics modeling, with suspension system based on two-sided PM. First of all, a halbach array was taken as the object of study, with the analytical solution of its magnetic force obtained by theoretical derivation according to magnet filed and 2D analytical method; then, the magnetic force was discretized into a data matrix of displacement, force, and speed; thirdly, the data matrix was introduced in SIMPACK to establish a magnet-track relationship in scalar form, and a dynamics model of the two-sided PM EDS maglev system was finished by the theory of multi-body dynamics modeling; finally, the proposed modeling was validated by the agreement between theoretical derivation and dynamics model calculation of the heaving frequency and pitching frequency of the frame; at the same time, it was also validated by the agreement of dynamic responses between the modeling by vehicle-track coupled dynamics theory and the dynamic model calculation of the levitation gap and force. According to the established dynamics model, dynamic response of the system at the speed of 600 km/h was calculated, and the feasibility of the two-sided PM EDS maglev train was verified. The simulation speed of model which was established before is 50 times that of the mathematical model by the vehicle-track coupled dynamics, thus providing reference for the future research in this regard.
3 September 2024 in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
The wheel wear of heavy-duty locomotives is more complicated than that of other vehicles when it affects tractive force and adhesion control. The purpose of this article is to calculate wheel wear on a curved track using a co-simulation dynamic model of a heavy-duty locomotive with adhesion control. Additionally, the effect of creep threshold, decline slope, curve radius, and passing speed on wheel wear is further investigated. The findings demonstrate that wheel wear can be successfully decreased by adjusting the creep threshold and decline slope of adhesion control parameters. The wheel-rail stick-slip vibration behavior on the curve track can be eliminated by increasing the curve’s radius and passing speed, but the vertical wear at the left wheel’s flange will rise sharply with the increase of passing speed on right hand curve.
5 April 2025 in International Journal of Structural Stability and Dynamics