12 May 2015 in Neural Processing Letters
1 January 2015 in Physics Procedia
This paper addresses the use of computer-aided diagnosis (CAD) system for the cataract classification based on ultrasound technique. Ultrasound A-scan signals were acquired in 220 porcine lenses. B-mode and Nakagami images were constructed. Ninety-seven parameters were extracted from acoustical, spectral and image textural analyses and were subjected to feature selection by Principal Component Analysis (PCA). Bayes, K Nearest-Neighbors (KNN), Fisher Linear Discriminant (FLD) and Support Vector Machine (SVM) classifiers were tested. The classification of healthy and cataractous lenses shows a good performance for the four classifiers (F-measure ≥92.68%) with SVM showing the highest performance (90.62%) for initial versus severe cataract classification
11 May 2015 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Field-programmable gate arrays (FPGAs) can potentially be configured as beamforming platforms for ultrasound imaging, but a long design time and skilled expertise in hardware programming are typically required. In this article, we present a novel approach to the efficient design of FPGA beamformers for synthetic aperture (SA) imaging via the use of software-based high-level synthesis techniques. Software kernels (coded in OpenCL) were first developed to stage-wise handle SA beamforming operations, and their corresponding FPGA logic circuitry was emulated through a high-level synthesis framework. After design space analysis, the fine-tuned OpenCL kernels were compiled into register transfer level descriptions to configure an FPGA as a beamformer module. The processing performance of this beamformer was assessed through a series of offline emulation experiments that sought to derive beamformed images from SA channel-domain raw data (40-MHz sampling rate, 12 bit resolution). With 128 channels, our FPGA-based SA beamformer can achieve 41 frames per second (fps) processing throughput (3.44 × 10 8 pixels per second for frame size of 256 × 256 pixels) at 31.5 W power consumption (1.30 fps/W power efficiency). It utilized 86.9% of the FPGA fabric and operated at a 196.5 MHz clock frequency (after optimization). Based on these findings, we anticipate that FPGA and high-level synthesis can together foster rapid prototyping of real-time ultrasound processor modules at low power consumption budgets.
5 May 2016 in Journal of Real-Time Image Processing