Hierarchical porous carbon with highly ordered straight micro-channels was prepared though a facile melt vacuum infiltration method using continuous filament glass fiber arrays as the template and glucose as the precursor. The as-prepared carbon material shows high specific surface areas up to 1880 m2 g−1 profited from the unique structure of straight micro-channels. A fine pore structure is formed in the channel wall through KOH activation after the removal of the glass fiber array. Electrochemical evaluation of the carbon material indicates that the hierarchical porous carbon exhibits a high specific capacitance of 283 F g−1 at a current density of 0.25 A g−1 with an alkaline electrolyte (6 M KOH) in a three-electrode system. It also demonstrates excellent cycling stability with a capacity retention of 88.5% over 10 000 cycles at a high current density of 6 A g−1. These exciting results demonstrate a very simple and low-cost method for large-scale preparation of electrode materials for supercapacitors.
28 July 2021 in ACS Applied Materials & Interfaces
Composite materials frequently allow the drawbacks of single components to be overcome thanks to a synergistic combination of material- and structure-specific features, leading to enhanced and also new properties. This is the case of a metallic-ceramic composite, a nickel-chromium-aluminum (NiCrAl) foam impregnated with La-doped Strontium Titanate (LST). This particular cermet has very interesting properties that can be used in different fields of application, namely: mechanical robustness provided by the metal foam; and chemical stability in harsh conditions of temperature and atmosphere by promotion of a thin protective layer of alumina (Al2O3); high electronic conductivity given by a percolating ceramic conducting phase, i.e., La-doped Strontium Titanate. In this paper, its application as a current collector in a metal-supported Solid Oxide Fuel Cells (SOFC) was studied. Firstly, the electronic properties of different compositions, stoichiometric and under stoichiometric, of LST were analyzed to choose the best one in terms of conductivity and phase purity. Then, LST chemical stability was studied in the presence of Al2O3 at different temperatures, gas compositions and aging times. Finally, stability and conductivity of LST-impregnated NiCrAl foam composite materials were measured, and LST was found to be fully compatible with the NiCrAl foam, as no reactions were detected in oxidizing and reducing atmosphere after up to 300 h operation at 750 °C and 900 °C between the Al2O3 layer and LST. Results showed that the composite is suitable as a current collector in innovative designs of metal-supported SOFC, like the Evolve cell, in which the metallic part is supposed not only to provide the structural stability to the cell, but also to play the role of current collector due to the impregnation of ceramic material.