Wood is usually stable under relatively dry conditions but may still undergo slow deterioration. The type of deterioration and how these processes affect the wood are important questions that need consideration if old wooden structures are to be studied and properly preserved. The aim of this paper is to establish the main structural and morphological differences between new and naturally aged European spruce (~ 150–200 years) and silver fir wood (~ 150 years). Naturally aged European spruce (a) was sourced from an outdoor part of a building constructed in the seventeenth century and naturally aged European spruce (b) were obtained from a furniture item located in a historical building from the eighteenth century. The principal age-induced changes in fir are the degradation of C–O and C=O groups in hemicellulose, according to the FTIR analysis. Degradation of cellulose and hemicelluloses was observed for spruce, with a greater effect seen in the indoor aged sample. X-ray photoelectron spectroscopy (XPS) showed that after aging C–C/C–H peaks were smaller in the spruce and fir samples, while C–O and O–C–O peaks were larger. The crystallinity index (CrI) obtained by X-ray diffraction showed that due to weathering the CrI of naturally aged spruce (a) increased compared to the new wood. The CrI of the aged spruce (b) and aged fir was lower than in the new woods. The ratios for the spruce sample, which aged indoors, were higher than those for the one aged outdoors. According to the observations made in this study, hemicellulose and cellulose are easily degraded under environmental conditions.
Amino acids L‐proline and trans‐4‐Hydroxy‐l‐proline were exposed to cold atmospheric plasma (CAP) generated by dielectric barrier discharge and operated in ambient air at dry conditions. Surface analysis reveals an oxygenation of both amino acids the degree of which is dependent on treatment time. New or NO2 groups are attached to the surfaces. Proline and hydroxyproline respond differently to the cold atmospheric plasma, proline being more prone to ring opening, fragmentation of the molecule, and attachment of COH and CO groups. Aging experiments show that plasma mediated attachment of new functional groups is, to a great degree, reversible over time.
The influence of plasma-reduction treatment on iron and copper compounds at different oxidation states was investigated in this study. For this purpose, reduction experiments were carried out with artificially generated patina on metal sheets and with metal salt crystals of iron(II) sulfate (FeSO4), iron(III) chloride (FeCl3), and copper(II) chloride (CuCl2), as well as with the metal salt thin films of these compounds. All the experiments were carried out under cold low-pressure microwave plasma conditions; the main focus was on plasma reduction at a low pressure in order to evaluate an implementable process in a parylene-coating device. Usually, plasma is used within the parylene-coating process as a supporting tool for adhesion improvement and micro-cleaning efforts. This article offers another useful application for implementing plasma treatment as a reactive medium in order to apply different functionalities by an alteration in the oxidation state. The effect of microwave plasmas on metal surfaces and metal composite materials has been widely studied. In contrast, this work deals with metal salt surfaces generated from a solution and the influence of microwave plasma on metal chlorides and sulfates. While the plasma reduction of metal compounds commonly succeeds with hydrogen-containing plasmas at high temperatures, this study shows a new reduction process that reduces iron salts at temperatures between 30 and 50 °C. A novelty of this study is the alteration in the redox state of the base and noble metal materials within a parylene-coating device with the help of an implemented microwave generator. Another novelty of this study is treating metal salt thin layers for reduction purposes in order to provide the opportunity to include subsequent coating experiments to create parylene metal multilayers. Another new aspect of this study is the adapted reduction process of thin metal salt layers consisting of either noble or base metals, with an air plasma pre-treatment prior to the hydrogen-containing plasma-reduction procedure.
30 March 2021 in Journal of Physics Communications
In this publication we report on the suitability of imaging ellipsometry for the semi-quantitative investigation of a contactless removal of human fingerprints from surfaces by an atmospheric pressure plasma tretament. Special attention is paid to the impact of the applied plasma on the complex mixture of biological substances of a fingerprint. For this purpose, the cleaning effect of an argon plasma at two different electrical powers is investigated. By using imaging ellipsometry as a analysis method it could be shown that the cleaning efficiency increases with increasing electrical power and plasma treatment time. In addition, measurements were made by means of x-ray photoelectron spectroscopy (XPS) in order to characterize the chemical composition of surface-adherent contamination and its plasma-induced modifications. It was found that especially the amount of organic impurities is reduced in the course of plasma treatment.