5 May 2011 in IEEE Photonics Technology Letters
We present a novel radio-frequency (RF) photonic phase shifter based on wavelength dependence of Brillouin frequency shift. A continuous and full phase shift up to 360° at 18 GHz is achieved when the wavelength of the optical carrier is scanned from 1549 to 1554 nm using stimulated Brillouin scattering (SBS) in a 1.2-km length of dispersion-shifted fiber (DSF).
14 February 2013 in Optics Letters
We propose a scheme for generating millimeter-wave (MMW) ultra-wideband (UWB) signal that is free from low-frequency components and a residual local oscillator. The system consists of two cascaded polarization modulators and is equivalent to a high-speed microwave photonic switch, which truncates a sinusoidal MMW into short pulses. The polarity switchability of the generated MMW-UWB pulse is also demonstrated.
6 August 2013 in IEEE Photonics Journal
We present a photonic approach to generating binary phase-coded microwave signals with large frequency tunability using a dual-parallel Mach-Zehnder modulator (DPMZM). The DPMZM consists of a pair of sub-MZMs embedded in the two arms of a parent MZM. In our scheme, one of the sub-MZMs is fed by a sinusoidal microwave signal to be phase-coded, and the other sub-MZM is driven by a rectangular coding signal. The optical signals from the two sub-MZMs are destructively interfered by adjusting the dc bias of the parent MZM. As a result, the optical carrier is binary phase coded. A binary phase-coded microwave signal is generated by beating between the optical carrier and the sidebands. The carrier frequency of the phase-coded microwave signal is widely tunable. Phase-coded microwave signals with two different frequencies at 10 and 20 GHz are experimentally generated, respectively.
8 July 2013 in IEEE Photonics Journal
We present a novel microwave photonic single-passband filter based on polarization control through simulated Brillouin scattering (SBS). The principle of the filter is based on a vector SBS process, which is different from the previously reported scalar SBS technique. For a radio-frequency (RF) modulated signal launched to the proposed processor, the state of polarization (SOP) of the optical carrier is rotated by 90° through a two-step SBS process. As a result, the RF signals cannot be recovered in the photodetector (PD). To recover the desirable RF signal, the SOP of the RF modulated sideband is rotated by another pump wave. Since the orthogonal polarization condition between the optical carrier and the sideband is destroyed, the desirable RF signal can be recovered. By adjusting the wavelength of the pump wave, the frequency response of the filter is tunable in a frequency range from ~2 to 20 GHz with out-of-band rejection of ~30 dB and -3 dB bandwidth of ~20 MHz. In addition, for any modulation format, it is converted to the single-sideband (SSB) modulation by the proposed filter. Therefore, the system is expected to be immune to the fiber dispersion-induced power fading. Moreover, it is independent of the modulation formats of the incoming signal wave. The filter structure can be inserted anywhere in conventional fiber-optic links without the need for modifying the link configuration and the transmitter.
22 July 2011 in IEEE Transactions on Microwave Theory and Techniques
We present a frequency-tunable RF carrier generation and broadband data upconversion technique for radio-over-fiber (RoF) systems. A dual-parallel Mach-Zehnder modulator is used to realize single-mode modulation (SMM). On the other hand, frequency-tunable RF carrier generation with single-sideband (SSB) modulation is performed using stimulated Brillouin scattering (SBS) with three types of configuration. The optical carrier-to-sideband ratio of the SMM-SSB modulated signal can be adjusted to achieve the best received sensitivity performance of the RoF system by simply modifying the pump power in the SBS process. Finally, the transmission performance of the RoF downlink system is examined. The power penalty is less than 1 dB at the bit-error rate of 10-9 after 25-km single-mode fiber transmission.
13 February 2012 in IEEE Photonics Technology Letters
We experimentally demonstrate a perfectly orthogonal optical single-sideband signal generation technique using stimulated Brillouin scattering. By using both the Brillouin gain and loss, a perfectly orthogonal optical single-sideband signal is achieved. In addition, the modulation depth of the single-sideband signal is adjustable by separately tuning the gain and loss for the optical carrier.