Laboratory of Catalysis, Characterization and Biofuels, Department of Chemical Engineering, Federal University of Campina Grande, Campina Grande – PB, Brazil
Auto-generated profile, based on publicly available information
Bianca Viana de Sousa Barbosa
Laboratory of Catalysis, Characterization and Biofuels, Department of Chemical Engineering, Federal University of Campina Grande, Campina Grande – PB, Brazil
Biodiesel is an alternative source of renewable energy that can be produced by a transesterification of vegetable oils. Mesoporous molecular sieves, such as SBA-15, due to high surface area and thermal stability are promising precursors for heterogeneous catalysts in the transesterification reaction. In this work, Al-SBA-15 precursor was obtained by direct hydrothermal synthesis, impregnated with different MoO3 contents (5, 10 and 15 wt%) by the pore saturation method, and evaluated as heterogeneous catalyst in the production of biodiesel from a transesterification of soybean oil with methanol. Al-SBA-15 precursor as well as MoO3/Al-SBA-15 catalyst were characterized for its structural characteristic by X-ray diffraction, textural characteristic by N2 adsorption analysis, and thermal stability by thermogravimetric analysis. An experimental planning 22 + 3 CtPt was used to evaluate the influence of MoO3 content and reaction time on biodiesel yield from soybean oil and methanol. The biodiesel content in the final product was obtained by gas chromatography. An average biodiesel yield of 96% was obtained with the catalyst 10%MoO3/Al-SBA-15 under the following reaction conditions: 20:1 methanol/soybean oil molar ratio, and 3 wt% of catalyst loading at 150 °C in 3 h. After five consecutive reaction cycles, the biodiesel yield decreased by about 34%. The density and acidity of the biodiesel produced are within the specified values for commercialization according to international standards. Graphical
Objective: Synthesize and characterize the heterogeneous catalyst MoO₃/Ce-SBA-15, to be applied in the transesterification reaction of soybean oil. Theoretical Framework: The molecular sieve SBA-15 is a mesoporous silica used as a support for the dispersion of active metals. Modification with cerium (Ce) enhances the textural properties, while doping with molybdenum oxide (MoO₃) increases the catalytic activity. This catalyst is applied in transesterification for the production of biodiesel, a renewable and efficient biofuel to replace fossil diesel. Method: Ammonium cerium nitrate was introduced along with the silica source in the synthesis gel, evaluating different Si/Ce molar ratios (10, 20). The obtained material was doped with MoO3 using the pore saturation method and evaluated in the transesterification reaction at different temperatures. Results and Discussion: Characterization analyses indicated that the longer crystallization time (48h) and the introduction of Ce into the structure improved the crystalline and textural properties of SBA-15. The presence of MoO₃ in its orthorhombic phase was confirmed by X-ray diffraction analysis. The maximum yield of methyl esters was 86.56% at 150°C using the 15MoO3/10Ce-SBA-15 catalyst. Research Implications: This research developed a new catalyst efficient in biodiesel production, contributing to the field of catalysis. Promoting advances in renewable energy and sustainability. Originality/Value: This study reports the influence of Ce as a structural promoter in the synthesis of a new catalyst (MoO3/Ce-SBA-15) to be applied in the transesterification reaction for biodiesel production.