28 June 2010 in IEEE Transactions on Microwave Theory and Techniques
This paper presents the research and development of two terahertz imaging systems based on photonic and electronic principles, respectively. As part of this study, a survey of ongoing research in the field of terahertz imaging is provided focusing on security applications. Existing terahertz imaging systems are reviewed in terms of the employed architecture and data processing strategies. Active multichannel measurement method is found to be promising for real-time applications among the various terahertz imaging techniques and is chosen as a basis for the imaging instruments presented in this paper. An active system operation allows for a wide dynamic range, which is important for image quality. The described instruments employ a multichannel high-sensitivity heterodyne architecture and aperture filling techniques, with close to real-time image acquisition time. In the case of the photonic imaging system, mechanical scanning is completely obsolete. We show 2-D images of simulated 3-D image data for both systems. The reconstruction algorithms are suitable for 3-D real-time operation, only limited by mechanical scanning.
10 December 2007 in IEEE Transactions on Microwave Theory and Techniques
A theoretical investigation of the use of a coupled line section as an impedance transformer is presented. We show how to properly select the terminations of the coupled line structures for effective matching of real and complex loads in both narrow and wide frequency ranges. The corresponding circuit configurations and the design procedures are proposed. Synthesis relations are derived and provided for efficient matching circuit construction. Design examples are given to demonstrate the flexibility and limitations of the design methods and to show their validity for practical applications. Wideband matching performance with relative bandwidth beyond 100% and return loss RL > 20 dB is demonstrated both theoretically and experimentally. Good agreement is achieved between the measured and predicted performance of the coupled line transformer section.
20 January 2011 in Electronics Letters
An integrated circulator based on low-temperature cofired ceramics (LTCC) tapes and LTCC compatible ferrite tapes has been developed for the first time and its performance has been verified experimentally. The insertion loss is less than 2 dB and the isolation is better than 25 dB with a centre frequency of 7.45 GHz. These results are in good agreement with simulations and offer a route towards integrated LTCC microwave circulators.
28 June 2017 in Nuclear Fusion
MUMast And Tcv Teams The Asdex Upgrade
Mast And Tcv Teams The Asdex Upgrade
+520
Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi-machine approach within EU-MST, covering a wide parameter range, is instrumental to progress in the field, as ITER and DEMO core/pedestal and SOL parameters are not achievable simultaneously in present day devices. A two prong approach is adopted. On the one hand, scenarios with tolerable transient heat and particle loads, including active edge localised mode (ELM) control are developed. On the other hand, divertor solutions including advanced magnetic configurations are studied. Considerable progress has been made on both approaches, in particular in the fields of: ELM control with resonant magnetic perturbations (RMP), small ELM regimes, detachment onset and control, as well as filamentary scrape-off-layer transport. For example full ELM suppression has now been achieved on AUG at low collisionality with n = 2 RMP maintaining good confinement . Advances have been made with respect to detachment onset and control. Studies in advanced divertor configurations (Snowflake, Super-X and X-point target divertor) shed new light on SOL physics. Cross field filamentary transport has been characterised in a wide parameter regime on AUG, MAST and TCV progressing the theoretical and experimental understanding crucial for predicting first wall loads in ITER and DEMO. Conditions in the SOL also play a crucial role for ELM stability and access to small ELM regimes.
1 October 2022 in Review of Scientific Instruments
The ITER Collective Thomson scattering (CTS) diagnostic will measure the dynamics of fusion-born alpha particles in the burning ITER plasma by scattering a 1 MW 60 GHz gyrotron beam off fast-ion induced fluctuations in the plasma. The diagnostic will have seven measurement volumes across the ITER cross section and will resolve the alpha particle energies in the range from 300 keV to 3.5 MeV; importantly, the CTS diagnostic is the only diagnostic capable of measuring confined alpha particles for energies below ∼1.7 MeV and will also be sensitive to the other fast-ion populations. The temporal resolution is 100 ms, allowing the capture of dynamics on that timescale, and the typical spatial resolution is 10–50 cm. The development and design of the in-vessel and primary parts of the CTS diagnostic has been completed. This marks the beginning of a new phase of preparation to maximize the scientific benefit of the diagnostic, e.g., by investigating the capability to contribute to the determination of the fuel-ion ratio and the bulk ion temperature as well as integrating data analysis with other fast-ion and bulk-ion diagnostics.
12 June 2013 in IEEE Transactions on Electron Devices
This paper presents a novel InP-SiGe BiCMOS technology using wafer-scale heterogeneous integration. The vertical stacking of the InP double heterojunction bipolar transistor (DHBT) circuitry directly on top of the BiCMOS wafer enables ultra-broadband interconnects with <; 0.2 dB insertion loss from 0-100 GHz. The 0.8 × 5 μm2 InP DHBTs show fT/fmax of 400/350 GHz with an output power of more than 26 mW at 96 GHz. These are record values for a heterogeneously integrated transistor on silicon. As a circuit example, a 164-GHz signal source is presented. It features a voltage-controlled oscillator in BiCMOS, which drives a doubler-amplifier chain in InP DHBT technology.