11 May 2020 in IEEE/ASME Transactions on Mechatronics
This paper presents a model predictive vehicle stability controller that considers tire force nonlinearities and the combined-slip effect. Loss of cornering forces caused by increased longitudinal slip and changes in the slip angle due to the vehicle lateral response are considered in the prediction model of the controller. The developed controller adjusts tire slip ratios based on forces of the front and rear axles, monitors tire capacities and normal forces, and exhibits excellent performance in maintaining lateral responses within a stable region. The performance of the proposed predictive controller is assessed in software simulations as well as road experiments in various pure-slip and combined-slip driving scenarios and under different road friction conditions.
19 September 2017 in Vehicle System Dynamics
In this paper, a model predictive vehicle stability controller is designed based on a combined-slip LuGre tyre model. Variations in the lateral tyre forces due to changes in tyre slip ratios are considered in the prediction model of the controller. It is observed that the proposed combined-slip controller takes advantage of the more accurate tyre model and can adjust tyre slip ratios based on lateral forces of the front axle. This results in an interesting closed-loop response that challenges the notion of braking only the wheels on one side of the vehicle in differential braking. The performance of the proposed controller is evaluated in software simulations and is compared to a similar pure-slip controller. Furthermore, experimental tests are conducted on a rear-wheel drive electric Chevrolet Equinox equipped with differential brakes to evaluate the closed-loop response of the model predictive control controller.
30 March 2018 in IEEE Transactions on Industrial Electronics
In this paper, a general control allocation (CA) algorithm is proposed based on a lexicographic optimization (LO) strategy for a vehicle's longitudinal and lateral control. The primary objective of this CA is to distribute the torque adjustments of the lateral controller such that the error between the desired and actual forces and moments at the vehicle's center of gravity is minimized, while maintaining the longitudinal tire slip ratios close to a desired range. Presence of various constraints in practical systems can significantly increase the complexity and effort of properly adjusting the tuning parameters in the objective function. Hence, an LO method is used to prioritize the objectives. Lateral stability of the vehicle has the highest priority and is subject to the constraint of maintaining small tire slip ratios. The second priority of CA is assigned to minimize the adjustment torques. The proposed LO-based approach reduces exhaustive vehicle testing commonly required for tuning of the separately designed controllers and the cost and time of the implementation. In addition, it makes the algorithm easily transferable from one vehicle to another by reducing the number of tuning parameters. Simulation and experimental results are presented to show the effectiveness of the proposed approach.
9 August 2017 in Journal of Dynamic Systems, Measurement, and Control
In this paper, a new approach is proposed to deal with the delay in vehicle stability control using model predictive control (MPC). The vehicle considered here is a rear-wheel drive electric (RWD) vehicle. The yaw rate response of the vehicle is modified by means of torque vectoring so that it tracks the desired yaw rate. Presence of delays in a control loop can severely degrade controller performance and even cause instability. The common approaches for handling delays are often complex in design and tuning or require an increase in the dimensions of the controller. The proposed method is easy to implement and does not entail complex design or tuning process. Moreover, it does not increase the complexity of the controller; therefore, the amount of online computation is not appreciably affected. The effectiveness of the proposed method is verified by means of carsim/simulink simulations as well as experiments with a rear-wheel drive electric sport utility vehicle (SUV). The simulation results indicate that the proposed method can significantly reduce the adverse effect of the delays in the control loop. Experimental tests with the same vehicle also point to the effectiveness of this technique. Although this method is applied to a vehicle stability control, it is not specific to a certain class of problems and can be easily applied to a wide range of model predictive control problems with known delays.