Mid-infrared fiber sources, emitting between 2.5 µm and 5.0 µm, are interesting for their great potential in several application fields such as material processing, biomedicine, remote sensing and infrared countermeasures due to their high-power, their diffraction-limited beam quality as well as their robust monolithic architecture. In this review, we will focus on the recent progress in continuous wave and pulsed mid-infrared fiber lasers and the components that bring these laser sources closer to a field deployment as well as in industrial systems. Accordingly, we will briefly illustrate the potential of such mid-infrared fiber lasers through a few selected applications.
We report a novel technique for side-pumping fluoride-based double-clad fibers, allowing a record coupling efficiency of 93% and a maximum power handling near 100 W at 981 nm. Our simple technique is based on wrapping a silica taper around a fluoride fiber and, therefore, does not require any complex fusion between these two dissimilar fibers. Under passive cooling, pump combiners made of undoped and erbium-doped fluoride fibers were successfully operated during several hours at respective incident powers of 91 and 44 W. Heat management issues and active cooling strategies are also discussed. This innovative combiner is a keystone towards the development of compact and robust high-power mid-infrared fiber lasers and amplifiers.
In this Letter, we report, to the best of our knowledge, the first demonstration of an in-band pumped gain-switched -doped fiber laser operating at 3.24 µm. The monolithic cavity bounded by two fiber Bragg gratings was pumped by a gain-switched -doped fiber system. It produced stable nanosecond pulses in a single-pulse regime on its entire operating range from 20 kHz to 120 kHz. A record average power of 1.43 W was achieved for a repetition rate of 120 kHz, and a record pulse energy of 19.2 µJ was achieved at 60 kHz. These results represent a significant improvement in -doped pulsed fiber laser performances and open the way to applications in the fields of remote sensing and material processing.
We report a 2800 nm -doped fluoride fiber amplifier that delivers 1 mJ pulses with an average power of 5 W and pulse duration of 1 ns at 5 kHz repetition rate. To the best of our knowledge, this is the highest pulse energy achieved from a fluoride-fiber-based system operating near 3 µm, and the W-level average power and short pulse lengths make the system a promising tool for biomaterials processing.
We report a tunable all-fiber laser emitting a maximum output power of 2.55 W around 3240 nm. The fiber laser cavity based on a fluoride fiber doped with dysprosium ions yields an efficiency of 42% according to the in-band launched pump power at 2825 nm. Due to a custom piezoelectric fiber Bragg grating (FBG) package, mechanical strains applied to the narrowband FBG used as the input cavity coupler allowed for fast tuning of the emission wavelength over a spectral range of 1.5 nm. This laser was deployed in the field in northern Québec (Canada) to assess its performances for remote sensing of methane in the presence of a significant amount of water vapor, i.e., over a hydroelectric reservoir. The preliminary results acquired during this field campaign confirm the great potential of the proposed approach for the development of a real-time active imaging system of greenhouse gases.