Department of Electrical Engineering, Eindhoven University of Technology and the Eindhoven Hendrik Casimir Institute (EHCI), Eindhoven, The Netherlands
Auto-generated profile, based on publicly available information
Aref Rasoulzadeh Zali
Department of Electrical Engineering, Eindhoven University of Technology and the Eindhoven Hendrik Casimir Institute (EHCI), Eindhoven, The Netherlands
Low polarization-dependent semiconductor optical amplifiers (SOA) co-integrated with passive circuits via an easy fabrication process are highly demanded in optical communication systems. However, despite several SOAs have been reported, co-integration of polarization-independent bulk SOA with passive waveguides in the InP platform to generate complex systems remains an issue. In this work, we design, simulate, fabricate and characterize a low polarization-dependent SOA based on a bulk active layer that is co-integrated with passive waveguides and exhibits its potential application to realize photonic integrated circuits. Simulation results are in good agreement with the experimental results. Based on the simulation results, the designed SOAs with the length of 300 μm, 750 μm, and 1500 μm cover broadband with 3-dB bandwidth of around 65 nm, 40 nm, and 37 nm, respectively. Characterization of SOAs with different lengths between 300 μm and 1500 μm co-integrated with passive waveguide has been performed. Broadband gain and polarization-dependent gain (PDG) less than 2 dB is measured for 300 μm SOA. Also, at 1550 nm, output saturation power of 12.8 dBm is achieved at the current density of 11.6 kA/cm2. For the longest SOA with 1500 μm length, the higher gain of 16 dB with PDG lower than 2.5 dB and saturation power of 7.4 dBm at the wavelength of 1588 nm and current density of 4.1 kA/cm2 are achievable. Thus, one could design SOA based photonic circuits with higher gain and saturation power and low PDG by exploiting different SOA lengths and design at the wavelength of interest, opening to potential application in photonic integrated circuits like low-loss and polarization-insensitive switches.
10 June 2024 in Journal of Optical Communications and Networking
Addressing the capacity, low cost, and low power challenges of 6G distribution networks, this paper proposes and demonstrates a multi-band optical metro-access network architecture employing semiconductor optical amplifier (SOA)-based wavelength division multiplexing (WDM) switches as low-cost and low-power multi-band optical add-drop multiplexers (MB-OADMs) to extend the capacity beyond C-band limits. We implemented and evaluated the performance of an SOA-based MB-OADM prototype in the C- and O-bands including the network reconfigurability, the node scalability, and the capability to support high-capacity transmission. Experimental results show that the MB-OADM-based network maintains high optical signal-to-noise ratio (OSNR) values up to 35.38 dB in the C-band and 33.56 dB in the O-band over 100 km across five nodes with a 20 km linkspan in between (a total of 100 km) without additional optical amplifiers at 25 Gbps. This work also assesses the MB-OADM-based network scalability in terms of nodes and data rate. Results indicated that the architecture supports cascading through nine C-band nodes over 45 km with a 3.6 dB power penalty at 25 Gbps for a bit error rate (BER) of 10−6 and through four O-band nodes with a 3 dB penalty at 25 Gbps for a BER of 10−6, maintaining nearly uniform power levels across channels at a BER under the FEC threshold. It successfully demonstrates PAM-4 at 50 Gbps and 100 Gbps data rate transmission operation crossing four nodes over a 4 km distance, with 2 dB and 2.4 dB power penalty at a BER of 10−3 in the C-band and 1.85 dB and 2.2 dB power penalty at a BER of 10−3 in the O-band, respectively.
We present a general theory for the coherence of Fano lasers based on a bound state in the continuum. We find that such lasers enable an orders-of-magnitude reduction in the quantum-limited linewidth and, by introducing mirror symmetry breaking, the linewidth can be further reduced. In contrast to ordinary macroscopic lasers, though, the linewidth may rebroaden due to optical nonlinearities enhanced by the strong light localization. This leads to the identification of optimal material systems. We also show that the coherence of this new type of microscopic laser can be understood intuitively using a simple, effective potential model. Based on this model, we examine the laser stability and deduce the dependence of the laser linewidth on the general Fano line shape. Our model facilitates the incorporation of other degrees of design freedom and can be applied to a general class of lasers with strongly dispersive mirrors.
Low polarization-dependent semiconductor optical amplifiers (SOAs) with an easy fabrication process and the capability to be co-integrated with passive elements are crucial in photonic integrated circuits. In this work, we design, simulate, and optimize a low polarization-dependent bulk SOA based on a novel layerstack with an unstrained bulk active layer with a robust and easy fabrication process that allows the co-integration with passive waveguides. The designed layerstack shows that the reflection between SOA and the passive waveguide is less than 1.3 × 10 −5 . Furthermore, by designing the ridge waveguide and layerstack (thickness of the core and cladding layers), the confinement factor of TE- and TM- modes (Г TE / TM ) are engineered to be approximately the same. This results in a low polarization-dependent SOA (since for the active bulk layer, the material gain of TE-mode is very close to the material gain of TM-mode). Numerical assessment of different length SOAs in terms of gain, polarization-dependent gain (PDG), noise figure are extensively investigated. Moreover, a booster SOA (1100 μm) with higher output saturation power has been investigated by widening the width of SOA from 1 μm to 3 μm. The output saturation power at 10 kA/cm 2 increases from +7.6 dBm to +13.9 dBm, when the width of the SOA waveguide increases from 1 μm to 3 μm. Finally, we discuss the fabrication tolerance on SOA characteristics. We show that the PDG strongly depends on the cladding layer thickness tolerance and decreases from 2.3 dB to 1.3 dB as it changes from 135 nm to 175 nm.
Integrated quantum dot passively mode-locked lasers: IQDMLLs open opportunities for IR sensing. Therefore, here, we investigated structure of quantum dot passively mode-locked lasers (QDMLLs) with colliding-pulse mode-locked (CPM) method in order to reinforce the performance of QDMLLs for ultrahigh-bit-rate compared to self-colliding pulse mode-locking (SCPM) method. The proposed structure is numerically based on finite difference traveling wave (FDTW) method. By considering bias current of 80 mA, which is the bias applied to the gain section, the laser is at its maximum output power. Finally, by comparing the QDMLLs with self-colliding pulse mode-locking (SCPM) method, it is shown that due to the grating caused by the collision of the two counter-propagating pulses in the saturable absorber, the laser bit rate in the structure of CPM is twice the bit rate in structure of SCPM somehow bit rate from 40 GHz in SCPM method increased to 80 GHz in CPM method. Also, grating coupling factor (GCF) changes due to the proposed structure has been shown, so that in the range of 1cm-1 ≤ κ ≤ 5cm-1 the laser output power is pulsed wave (PW), while after this range the laser output power changes from a pulsed regime to a continuous wave (CW) regime.