20 June 2019 in IEEE Journal of Solid-State Circuits
To overcome the low-efficiency and limited working range of the existing RF energy harvesting (EH) systems for the wireless Internet-of-Things (IoT) sensors, a novel reconfigurable system is proposed with integrated hill-climbing, maximum power point tracking (MPPT) function for wide input power from -22 to 4 dBm. A conceptual linear model with high accuracy is also proposed to analyze the rectifier efficiency for MPPT operations. The rectifier with off-chip matching is designed with a patch antenna at 915-MHz the industrial, scientific and medical (ISM) band. To further improve the end-to-end efficiency, the harvested power is used to power up the circuit block in system on a chip (SoC) directly, avoiding additional conversion loss. Our proposed reconfigurable 12-stage rectifier with matching network achieves -18.1-dBm sensitivity for 1-MΩ loading and 36% peak efficiency at 1 dBm. The proposed MPPT function can detect and determine the optimal rectifier stage for loading from 10 KΩ to 1 MΩ. The measured MPPT accuracy is over 87% from -22 to 4 dBm compared to external tuning conditions. The minimum stand-by power is 20 nW at 0.5 V and the overall MPPT power efficiency is over 72% with a peak value of 99.8% including dissipated power. Measurements also show the system can achieve self-startup and self-sustained functions with a 10-μF external capacitor buffer.
8 January 2020 in IEEE Journal of Solid-State Circuits
This article presents a low-power multi-mode CMOS vision sensor with mixed-signal in-sensor computation capabilities targeting the next-generation wireless sensing applications. To support the always-on and scene-adaptive edge computing scenarios with low power and low bandwidth, the sensor is reconfigurable for three operation modes, namely: 1) motion sensing (MS); 2) object segmentation (OS); and 3) full imaging (FIM). A mixed-signal cooperative scheme of frame differencing (FD) and background subtraction (BS) is proposed to achieve high-accuracy MS with varying object sizes and speeds. The mixed-signal BS-based OS can minimize both object localizing and imaging efforts for object analysis upon motion triggering, while FIM enables complete scene recording for the identified object of interest. The complete CMOS vision sensor is implemented through reconfigurable and fully dynamic mixed-signal processing at both pixel and column levels cooperatively to achieve low power and compact area. Fabricated in a 0.18-μm CMOS, the 256 x 216 chip prototype achieves the cooperative MS with only 2.36 μW at 15 frames/s, when composed of 14 FD frames (147 nJ/frame) and 1 BS frame (302 nJ/frame). The OS mode consumes 1.44~2.04 μJ/frame at 0%~100% object occupancy, linearly corresponding to 41%~16% power saving when compared with the conventional digital OS. The FIM mode operates with only 1.41 μJ/frame for complete scene recording. The achieved energy efficiencies for all operation modes compare favorably with the state of the art.
27 May 2021 in IEEE Transactions on Biomedical Circuits and Systems
Both bacterial viability and concentration are significant metrics for bacterial detection. Existing miniaturized and cost-effective single-mode sensor, pH or optical, can only be skilled at detecting single information viability or concentration. This paper presents an inverter-based CMOS ion-sensitive-field-effect-transistor (ISFET) sensor array, featuring bacterial pH detection which is an indicator of viability. The proposed design realizes pH detection using the native passivation layer of CMOS process as a sensing layer and configuring an inverter-based front-end as a capacitive feedback amplifier. This sensor array is assisted by temperature sensing and optical detection which reveals bacterial concentration. The optical detection is enabled using the leakage current of a reset switch as a response to a light source. While in reset mode, the inverter-based amplifier works as a temperature sensor that could help to reduce temperature influences on pH and optical detection. All the functionalities are realized using one single inverter-based amplifier, resulting in a compact pixel structure and largely relaxed design complexity for the sensor system. Fabricated in 0.18 $\mu$ m standard CMOS process, the proposed CMOS sensor array system achieves an amplified pH sensitivity of 221 mV/pH, an improved sensor resolution of 0.03 pH through systematic noise optimization, a linear optical response, and a maximum temperature error of 0.69 $^{\circ }$ C. The sensing capabilities of the proposed design are demonstrated through on-chip Escherichia coli (E. coli) detection. This study may be extended to a rapid and cost-effective platform that renders multiple information of bacterial samples.
24 July 2018 in IEEE Transactions on Circuits and Systems II: Express Briefs
This brief presents a low-power compression-based CMOS image sensor for wireless vision applications. The sensor implements low-bit-depth imaging with planned sensor distortion (PSD) to effectively compress both data bandwidth and processing power while maintaining high reconstruction image quality. Accordingly, a column-parallel microshift-guided successive-approximation-register (SAR) ADC is proposed to enable 3-bit PSD imaging based on a 3×3 pattern. To support normal imaging with low area overhead, the circuit is reconfigurable as an 8-bit SAR/Single-Slope (SS) ADC. The data bandwidth is further compressed by a customized lossless encoder based on predictive coding and run length coding. A 256×216 prototype imaging system composed of the compression-based image sensor and the lossless encoder is fabricated in a 0.18 μm standard CMOS process. Measurement results show that the image sensor achieves 3 bit/pixel (bpp) with 34.9 dB reconstruction peak signal-to-noise ratio (PSNR) and 0.91 structural similarity index (SSIM). With 1/4 spatial downsampling and lossless encoding, 0.31 bpp is obtained with 29.2 dB PSNR and 0.83 SSIM. The sensor consumes 14.8 μW (full resolution) and 4.3 μW (downsampling) at 15 fps, achieving state-of-the-art FoMs of 17.8 and 5.2 pJ/pixel∙frame respectively. Including the encoder, the overall system dissipates as low as 1.2 μJ/frame, making it an attractive solution for wireless sensor networks.
3 March 2020 in IEEE Transactions on Biomedical Circuits and Systems
This paper presents a CMOS ion-sensitive-field-effect-transistor (ISFET) array with superior offset distribution tolerance, resolution and linearity for long-term bacterial metabolism monitoring. A floating gate ISFET is adopted as the sensing front end to maximize ion sensitivity and support ultra-long-term measurement. To solve the DC offset issue induced by trapped chargers and drifts in each ISFET sensor, a complementary readout scheme with column offset compensation is proposed. P-type and N-type source followers are combined to cover a wide range of input DC offsets while maintaining small area and high linearity. The DC offset is digitally compensated during signal readout to facilitate global amplification and quantization. Fabricated in 0.18 μm standard CMOS process, the ISFET array can tolerate an offset distribution beyond power supply with a linear pH-to-output response. Due to high ion sensitivity and low circuit noise, the whole system achieves a high resolution of 0.017 pH. The proposed ISFET system has successfully demonstrated an accurate pH monitoring of normal Escherichis coli growth for 11 hours and its response to antibiotics, showing long-term bacterial metabolism monitoring capability.
14 September 2023 in IEEE Transactions on Biomedical Circuits and Systems
Existing miniaturized and cost-effective solutions for bacterial growth monitoring usually require offline incubators with constant temperature to culture the bio-samples prior to measurement. Such a separated sample preparation and detection scheme requires extensive human intervention, risks contamination, and suffers from poor temporal resolution. To achieve integrated sample preparation and real-time bacterial growth monitoring, this article presents a lab-on-a-CMOS platform incorporates an optical sensor array, temperature sensor array, micro-heaters, and readout circuits. Escherichia coli's (E. coli) optimum growth temperature of 37 $^{\circ }$ C is achieved through a heat regulation system consisting of two micro-heaters and an on-chip temperature sensor array. A photodiode array with an in-pixel capacitive trans-impedance amplifier to reduce inter-pixel cross-coupling is designed to extract the optical information during bacterial growth. To balance the footprint, power consumption, and quantization speed, a 10 b column successive-approximation register (SAR)/single-slope (SS) dual-mode analog-to-digital converter (ADC) is designed to digitize the temperature and optical signals. Fabricated in a standard 0.18 um CMOS process, the proposed platform can regulate the sample temperature to 37 +/− 0.2/0.3 $^{\circ }$ C within 32 mins. Enabled by an on-chip heat regulation system and photodetectors, the prototype demonstrates a real-time monitoring of bacterial growth kinetics and antibiotic responses. Minute-level temporal resolution is achieved as this proposed platform is free of extensive and time-consuming human intervention. The proposed platform can be viably used in contamination sensitive applications such as antibiotic tests, stem cell cultures, and organ-on-chips.