9 May 2023 in IEEE Transactions on Smart Grid
This paper proposes a fast-lightweight location detection framework (FLLF) for false data injection attacks (FDIAs). The location detection of false data injection attacks is traditionally realized by computationally intensive neural networks, which can cause large detection delays due to the limited computation power and storage resources of the detection device. By contrast, the proposed method is lightweight and can be deployed on low-cost devices such as embedded devices, significantly improving detection speed while reducing power consumption. The proposed method consists of an efficient FDIA location detection model and an automatic model search algorithm. The model is a lightweight model that enables fast and accurate attack location detection through a combination of the early exiting mechanism and mixed-precision quantization (EE-MPQ). Then, an automatic model search algorithm is designed to enable the EE-MPQ model to match the smart grids with different structures. Finally, it is shown that the proposed method can accurately detect and locate FDIAs through numerical analysis on the IEEE 14-bus and 118-bus power systems.
11 October 2021 in IEEE Transactions on Industrial Informatics
This article investigates the distributed state estimation problem for large-scale power systems with the appearance of bad data. The power system is decomposed into several nonoverlapping agents and these agents interact with each other through transmission lines to form an interconnected multiagent power system (IMAPS). The measurement at each agent is local measurement, and the measurement in transmission line is edge measurement. To obtain an accurate state estimation of each agent in a distributed manner when the measurements are coupled with bad data, a bad data detection process should be designed. The difficulty is how to detect the bad data in edge measurement in a distributed scheme. To solve this problem, the characteristics of the edge measurement residual is analyzed, and a distributed bad data detection strategy is presented based on a novel iterative distributed Kalman-like filter (IDKF). It is proved that the IDKF algorithm can converge in finite steps when the communication graph of the IMAPS is acyclic, and the estimation accuracy is similar to that of the centralized Kalman filter. In addition, the IDKF algorithm shows excellent performance even when bad data appears. Simulation tests conducted on the IEEE 118-bus power system verify the theoretical findings.
23 September 2025 in IEEE Transactions on Industrial Informatics
The wake effect, which significantly degrades the power output of a wind farm, has prompted widespread consideration of the farm-level power generation optimization problem. However, the optimization problem is highly challenging when a large-scale wind farm encounters highly dynamic wind conditions. To address this issue, we proposed a semi-decentralized data-model-driven optimization scheme that utilizes real-time data by interacting with the wind farm and has a fast solving speed. First, the optimization problem is divided into several static subproblems according to the power efficiency in different wind directions. For every static subproblem, the large-scale farm is decomposed into clusters based on the wake model and the spectral clustering algorithm. When controlled online, data-driven methods are performed in parallel for power maximization according to the cluster division result. In addition, a multivariable coupling wake model is employed to validate the effectiveness of the optimization scheme. Simulation results indicate an apparent enhancement in energy output for large-scale wind farms operating under dynamic wind conditions.