21 July 2021 in Archive of Applied Mechanics
31 July 2019 in Advances in Structural Engineering
Steel–concrete bridges on highways are now widely used, and their dynamic coupling effect is more prominent under heavy vehicles. At present, for the study of vehicle–bridge coupling, it is difficult to reflect the mechanical response characteristics of the bridge pavement because the bridge pavement (road) is often considered as a load. In order to get closer to reality, we use the whole vehicle model and the bridge model to realize the dynamic coupling of highway vehicle–bridge. Moreover, the vehicle model can take into account tire characteristics, such as various linear and nonlinear suspension characteristics, and tire–ground contact characteristics. So, a new vehicle–road–bridge interaction method with higher computational efficiency is proposed. This method can be used not only to analyze the overall mechanical response of bridge structure such as deflection and stress but also to analyze the dynamic characteristics of driving vehicles and the coupling force between tires and pavement and then to analyze the dynamic deformation and stress of asphalt pavement layers on the bridge. First, according to the construction drawings of a steel–concrete bridge on a highway and a Dongfeng brand three-axle vehicle, a vehicle–road–bridge interaction rigid–flexible coupling model was established. Second, the correctness and effectiveness of the vehicle–road–bridge interaction model were verified by field testing. Finally, the dynamic response of the vehicle–road–bridge interaction rigid–flexible coupling model was analyzed.
1 December 2021 in Journal of Transportation Engineering, Part B: Pavements
This paper proposes a scheme to study dynamic responses of viscoelastic asphalt pavement under vehicle–bridge interaction. It is of great importance to accurately describe tire–pavement contact for dynamic behavior and damage prediction of pavement. The tire model consists of hyperelastic rubber and linear-elastic hub, and the viscoelastic pavement is supported by a three-span continuous steel-concrete bridge. Then, the dynamic coupling axial force considering vehicle–bridge interaction is applied to the tire connecting shaft, and the tire–pavement interaction system is established. In addition, the tire–pavement finite-element (FE) model is validated by a field test in Qugang Expressway, China. Finally, through parametric analysis, the effects of tire loads, pavement constitutive models, vehicle speeds, weights, and road roughness on the dynamic behavior of flexible pavement are obtained. Also, stress distribution rules of the viscoelastic pavement are discussed.
31 January 2026 in Engineering Fracture Mechanics
1 January 2024 in Shock and Vibration
Asphalt mixture is a viscoelastic material composed of aggregates, asphalt mastics, and voids. Meanwhile, the dynamic interaction between vehicle and bridge makes asphalt deck pavement in a more complex stress state, leading to premature damage such as cracks and ruts during its operation service period. Therefore, the effects of the viscoelastic characteristics of asphalt mixtures and vehicle‐bridge interactions on the dynamic behaviors of deck pavement cannot be ignored. However, it is difficult to directly couple the viscoelastic properties of mixtures and vehicle‐bridge interactions using the finite element method. Thus, this paper presents a decoupled method named the separation reconstruction algorithm. To theoretically verify whether the separate construction (SR) algorithm is consistent with the direct coupling (DC) algorithm, two dynamic system models of a Bernoulli–Euler composite beam under a moving vehicle are established, which correspond to the two algorithms. The kinematic equations of the system are derived and dispersed by the classical Galerkin method. The nonlinear integral term is simplified by the parity of the function, periodicity of the trigonometric function, and derivation. Then, the coupled equation can be rewritten in an ordinary differential form and solved with the Runge–Kutta method. Finally, it is proven that the proposed SR algorithm is basically consistent with the DC algorithm, and the SR algorithm is extended to practical engineering to study the coupling dynamic responses of viscoelastic deck pavement more accurately. Some new insight is gained by exploring the stress status of viscoelastic deck pavement under coupled conditions, which is conducive to more accurate evaluations of surface tensile effects induced by vehicle‐bridge interactions.