25 June 2015 in Journal of Plant Ecology
Both high and low densities of macrophyte vegetation can impair its ecosystem service function. Harvesting is often applied to macrophyte vegetation to maintain an appropriate density. Vegetation harvesting has occasionally gone awry and caused catastrophes, such as vegetation disappearance and cyanobacterial dominance in waterways and lakes. Because water depth influences macrophyte density at all life stages, the simultaneous influences of harvesting and water depth should be carefully examined. Thus, this study aims to quantify the effects of differently harvesting Elodea nuttallii on its growth and reproduction at different water depths in field experiments. Four harvest intensities (harvesting E. nuttallii plant heights equal to 25%, 50%, 75% and 100% of the water depth) were applied to E. nuttallii growing at four different water depths (60, 90, 120 and 150cm). Plant length and root length were measured. The node number, root number of each plant and number of floating plants were counted before harvesting. The harvested plant were dried to a constant weight for dry weight determination. The rate of increase in the length and shoot number of E. nuttallii varied from −0.012 to 0.440 day−1 and from −0.020 to 0.639 day−1, respectively. Water depth >150cm would limit E. nuttallii growth. Elodea nuttallii responded to increasing water depths and low-intensity harvesting by increasing internodal length and decreasing shoot number. The larger internodal length of E. nuttallii observed in relatively deeper water was also induced by the physical strain generated by its buoyancy as its specific gravity was less than water’s. The physical mechanism of removing the plant canopy by harvesting decreased E. nuttallii buoyancy and prevented floating. Harvesting increased plant production in shallow waters <90cm deep. Moreover, it is also necessary to perform three medium-intensity harvests at a water depth of 120cm and one low-intensity harvest or no harvesting at a water depth of 150cm to achieve longer lifetimes and less biomass near the water surface when the plants reach or approach the water surface.
22 August 2015 in Environmental Management
12 January 2012 in Environmental Technology
Currently available pore water samplers generally do not allow continuous monitoring of temporal variations in pore water composition. Therefore, a new type of pore water collector was designed and constructed. These collectors were constructed of polyvinyl chloride (PVC) materials, including PVC tubing with one end sealed and another end topped with a removable PVC screw-cap. A row of holes was drilled 10 cm from the sealed end of each collector. These new collectors were deployed in different layers of the sediment in a constructed wetland in Lake Taihu, China, to reveal variations in the nutrient composition of pore water with high spatial and temporal resolution. Specifically, the collectors were driven into the sediment, and the pore water flowed into the tubing via gravity. The pore water was then sampled from the PVC tubing using a portable vacuum pump, and then was taken to the lab within 20 min for analysis of the dissolved oxygen (DO) and nutrient concentration. The DO concentration of the pore water was below the detection limit for all samples, indicating that the pore water was probably not influenced by the air and that the water in the collector tube was representative of the pore water. These findings suggest that the collector is capable of measuring the temporal and spatial variations in the nutrient concentrations in pore water. Furthermore, the inexpensive material, ease of construction, minimal disturbance to the sediment and applicability for wetland sediments are advantages of the collector presented here compared with traditional pore water sampling techniques.