College of Electrical and Information Engineering, National Engineering Laboratory for Robot Visual Perception and Control, Hunan University, Changsha, China
Auto-generated profile, based on publicly available information
Shuangwen Fan
College of Electrical and Information Engineering, National Engineering Laboratory for Robot Visual Perception and Control, Hunan University, Changsha, China
This article addresses the image-based control problem of a quadrotor for tracking an unknown moving target under external disturbances. Based on the continuous observer design, a constructive image-based visual servoing (IBVS) geometric tracking control strategy is proposed and utilized. First, a higher order sliding mode observer is designed based on image dynamics for continuous estimation of unmeasurable linear velocities and time-varying disturbances. Furthermore, exploiting the linear quadratic regulator optimal design method, an outer loop IBVS controller is proposed such that the position of the quadrotor converges to the desired tracking pattern. Next, an inner loop geometric controller is designed using Lie algebra functions to regulate the attitudes. Based on the Lyapunov stability theory, it is rigorously proven that the proposed IBVS geometric controller achieves asymptotic stability. Finally, the effectiveness and robustness of the proposed approach against uncertain targets, time-varying disturbances, and large initial inclination angles are demonstrated through numerical simulations and experiments.
29 March 2022 in IEEE Transactions on Intelligent Vehicles
This paper proposes a homography-based visual servo control approach for the stabilization of underactuated unmanned aerial vehicles in GPS-denied environments. A virtual homography matrix is proposed, and a new visual error vector is defined to obtain the passivity-like visual error equation. In addition, a homography-based online translation velocity estimator and a nonlinear backstepping visual servo control approach are addressed to promote fast maneuvering without linear velocity feedback. Unlike conventional homography-based visual servo control solutions that only guarantee the local stability in the equilibrium, the proposed control scheme can get the global stability in large offset. Simulation and experimental tests with a realistic quadrotor subject to the measurement noise are carried out to verify the robustness and performance of the control approach. In addition, the autonomous tracking experiment when the target speed is unpredictable are also reported.
In recent years, autonomous control based on contact inspections in unknown environments is a new hot and difficult point in robotics research. This paper presents a new control law for unmanned aerial manipulator (UAM) to perform contact inspection tasks on vertical surfaces. The selected circular image feature decouples the position and attitude of UAM, so an image-based impedance control is proposed to control the position and track the contact force. The developed controller uses geometric methods to control the attitude. In addition, the designed aerial manipulator decouples the roll and pitch of the UAV from the UAV, which improves the system’s stability. Experiments have been carried out to demonstrate the feasibility of this method.