Rémy Junqua

Rémy Junqua

Auto-generated profile, based on publicly available information

Rémy Junqua

Unité de recherche Œnologie, EA 4577, USC 1366 INRAE, ISVV, Université de Bordeaux, Bordeaux INP, 33882, Villenave d’Ornon - Seguin Moreau cooperage, ZI Merpins, Cognac

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 January 2020 in OENO One
Verified
Journal Article
Open access
RJRémy Junqua
Rémy Junqua
EVEmmanuel Vinsonneau
Emmanuel Vinsonneau
RGREMY GHIDOSSI
REMY GHIDOSSI
UV-C light is well known for its germicidal properties and is widely used for water disinfection. However, its low penetration into absorbing liquids, such as wines and musts, reduces drastically the microbial inactivation effectiveness. Additionally, wines require UV-C doses to be as low as possible to avoid any possible light-struck flavors. In order to add to the technologies that allow the reduction of SO2 use, a coiled UV-C reactor was designed to inactivate microorganisms in wines and musts. Due to its unique hydrodynamic characteristics, this design could improve the exposure probabilities of the microorganisms to the UV-C light in absorbing liquids. In a first step, theoretical and measured fluid dynamics parameters such as Dean number were employed to improve the operating conditions of the reactor. The higher the Dean number, the higher the UV-C dose delivery efficiency in this reactor, and thus the lower the dose required to inactivate a given load of microorganisms. The second step investigated the impact of different wines on microbial inactivation efficiency and the UV-C doses required to inactivate microorganisms frequently found in wines. White and rosé wines, with low absorbances at 254 nm, required lower doses (≈ 600 J/L) than red wine (≈ 5000 J/L) because their absorption coefficient is ten times lower. The tolerance of microbial strains to UV-C treatments was variable, with higher resistance observed for yeast than for bacteria. In the third step, treatments conducted at semi-industrial scale showed that physicochemical and sensorial properties of wines and musts were not altered, highlighting the possible relevance of such a reactor on an industrial scale. Highlights: • Design of a coiled UV-C reactor for microbial stabilization of wines and musts• Focus on inactivation efficiency in multiple strains and wine varieties• Chemical and sensorial analyses to ensure treatment does not affect the organoleptic properties of the product

2 July 2021 in OENO One
Verified
Journal Article
Open access
PDF file
RJRémy Junqua
Rémy Junqua
LZLiming ZENG
Liming ZENG
APAlexandre Pons
Alexandre Pons
The oak barrel maturation step is nowadays strongly rooted in the production of quality wines. Two main physico‑chemical phenomena contribute to the modification and improvement of wine: the solubilisation of volatile and non-volatile wood compounds concomitant with the dissolution of oxygen from the air into the wine. Indeed, wood is a porous material and gas transfer (especially oxygen transfer, expressed as oxygen transfer rate or OTR) through oak barrels, is an intrinsic parameter which ensures wine oxygen supply during maturation. Due to its oenological impact, it has been actively studied over recent decades using several approaches based on the same principle: the monitoring of oxygen in a model wine solution in the barrel. This project aimed at assaying barrel OTR by using a new tool based on the theoretical knowledge of gas transfer through porous materials. An oxygen concentration gradient was created on each side of a barrel kept in an airtight stainless-steel tank. The concentration of the oxygen in the atmosphere around the barrel was monitored in order to quantify oxygen transfer, thus the avoiding common drawbacks of interactions between dissolved oxygen ingress kinetics and the consumption of oxygen in the liquid phase by wood components. This study reports for the first time, the diffusion coefficient of entire oak barrels (Q. sessilis) to be between 10-10 and 10-9 m²/s, and it contributes to increasing knowledge on the complex phenomena driving oxygen ingress during the maturation of wine in barrels kept in cellar conditions. The results highlight the important role of wood moisture content in oxygen transfer, and provides a simple and reliable parameter to monitor it: the weight of the barrel. Following methodology developed by the authors, the OTR of a new oak barrel was found to be 11.4 mg/L per year. Taking into account the oxygen released through the wood pores, a new barrel will contribute 14.4 mg/L per year of oxygen to the wine, of which 46 % in the first three months of aging.

2 April 2026
Verified
Thesis
Closed access
RJRemy Junqua
Remy Junqua
La contamination des vins par des microorganismes non désirés peut entraîner une dégradation importante du produit. Pour lutter contre ces problèmes, le dioxyde de souffre (SO2) est l’additif le plus utilisé actuellement pour ses propriétés antiseptiques et antioxydantes. Cependant, la limitation des intrants chimiques dans les vins est une des préoccupations majeures des consommateurs et producteurs. Les procédés de stabilisation physiques existants (flash pasteurisation, filtration tangentielle) présentent quant à eux des inconvénients, tels que leur cout énergétique ou leur maintenance complexe. Deux procédés innovants permettant d’assurer la stabilisation microbiologique des vins en alternative aux procédés classiques sont étudiés : le rayonnement ultraviolet (UV-C) et le chauffage ohmique. Les rayonnements UV-C (100 à 280 nm) sont connus pour leur effet germicide et déjà appliqués dans le traitement de l’eau et des surfaces. Cependant les liquides absorbants, tels que le vin, limitent fortement la profondeur de pénétration du rayonnement et donc l’efficacité du procédé. Un réacteur UV-C hélicoïdal a été développé, basé sur les propriétés hydrodynamiques des vortex de Dean, pour améliorer l’efficacité et l’homogénéité du traitement. Les performances de stabilisation ont été validées pour la première fois en alternative au mutage par SO2 de mouts liquoreux et avant la mise en bouteille de vins finis. De plus, les analyses chimiques et sensorielles menées sur les vins traités ne montrent aucun impact sur la qualité des vins. Le chauffage ohmique est ici utilisé comme procédé de stabilisation thermique des mouts et des vins. Lors du passage d’un courant à travers un matériau ayant une résistance électrique, l’énergie électrique est transformée en énergie thermique. La chaleur est alors générée à l’intérieur même de la matière à traiter. Les résultats des travaux ont montré pour la première fois que la rapidité et l’homogénéité de chauffe permettent une stabilisation efficace des vins et des mouts sans préjudices sur leur qualité.