4 April 2005 in Structural Control and Health Monitoring
The identification of structural damage is an important objective of health monitoring for civil infrastructures. System identification and damage detection based on measured vibration data have received intensive studies recently. Frequently, damage to a structure may be reflected by a change of some system parameters, such as a degradation of the stiffness. In this paper, we propose an adaptive tracking technique, based on the extended Kalman filter approach, to identify the structural parameters and their changes when vibration data involve damage events. The proposed technique is capable of tracking the changes of system parameters from which the event and severity of structural damage may be detected on‐line. Our adaptive filtering technique is based on the current measured data to determine the parametric variation so that the residual error of the estimated parameters is contributed only by noise. This technique is applicable to linear and nonlinear structures. Simulation results for tracking the parametric changes of nonlinear elastic, hysteretic and linear benchmark structures are presented to demonstrate the application and effectiveness of the proposed technique in detecting structural damage, using measured vibration data. Copyright © 2005 John Wiley & Sons, Ltd.
1 January 2009 in Journal of Sound and Vibration
1 July 2003 in Journal of Structural Engineering
Because of their intrinsically nonlinear characteristics, development of control strategies that are implementable and can fully utilize the capabilities of semiactive control devices is an important and challenging task. In this study, the use of an adaptive fuzzy control strategy is proposed for protecting buildings against dynamic hazards, such as severe earthquakes and strong winds, using magnetorheological (MR) damping technology. The proposed adaptive fuzzy control strategy involves the design of a fuzzy controller and an adaptation law. The control objective is to minimize the difference between some desirable response and the response of the combined system by adaptively adjusting the MR damper. The use of the adaptation law eliminates the needs of acquiring characteristics of the combined system in advance. Because the control strategy based on the combination of the fuzzy controller and the adaptation law does not require a prior knowledge of the combined building-damper system, this approach provides a robust control strategy that can be used to protect nonlinear structures with uncertainty subjected to random loads.
1 March 2008 in Journal of Infrastructure Systems
An objective of the structural health monitoring system is to identify the state of the structure and to detect the damage when it occurs. Analysis techniques for damage identification of structures, based on vibration data measured from sensors, have received considerable attention. Recently, a new adaptive damage tracking technique, based on the extended Kalman filter approach, has been proposed. Simulation studies demonstrated that the adaptive extended Kalman filter (AEKF) approach is capable of tracking the variations of structural parameters, such as the degradation of stiffness, due to damages. In this paper, we present experimental studies to verify the capability of the AEKF approach in identifying the structural damage by conducting a series of experimental tests using a small-scale three-story building model. Two types of excitations have been used, including the white noise applied to the top floor of the model and the earthquakes applied to the base. To simulate structural damage during the test, an innovative device is proposed in this paper to reduce the stiffness of some stories. Different damage scenarios have been simulated and tested. Measured response data and the AEKF approach are used to track the variation of stiffness during the test. The tracking results for the stiffness are also compared with the stiffness predicted by the finite-element method. Experimental results demonstrate that the AEKF approach is capable of tracking the variation of stiffness parameters leading to the detection of structural damage.
26 May 2005 in Smart Materials and Structures
20 May 2023 in Materials Characterization