In this article, detailed trials were undertaken to study the variation in genetic parameters in order to formulate more robust predictive models using gene expression programming (GEP) and multigene expression programming (MEP) for computing the swelling pressure of expansive soils (Ps-ES). A total of 200 datasets with ten input parameters (i.e., clay fraction CF, liquid limit , plastic limit , plasticity index IP, specific gravity Gs, swell percent Sp, sand content, silt content, maximum dry density ρdmax, and optimum water content ) and one output variable, i.e., Ps-ES are collected from the literature, which comprises 120 internationally publications. The effect of input parameters in contributing to Ps-ES has been validated using Pearson correlation (r), sensitivity analysis (SA), as well as a parametric study. The results reveal that the GP-based techniques correctly characterize the swelling characteristics of the ES, thus leading to reasonable prediction performance; however, the MEP model yielded relatively better performance. Also, the proposed predictive models were compared with widely used AI models (ANN, ANFIS, RF, GB-T, DT, and SVM). The ANN performed relatively better; however, it is recommended to use the GEP and MEP due to the blackbox nature of the ANN. Other models exhibited inferior performance. The SA revealed different importance by the GEP and MEP models, however, its confirmed that the maximum dry density and optimum moisture content significantly affect the Ps-ES. The variation in Ps-ES with changes in input attributes is further corroborated from literature. Hence, it is recommended that the proposed GEP and MEP models can be deployed for computing the Ps-ES which efficiently lessens the laborious and time-consuming testing.
Over the past two decades, a number of researchers studied different aspects of the unconnected piled raft foundation (UPRF) system. In this system, a structural fill cushion is inserted between the raft and the concrete piles (PC) where the cushion transfers the loads from the superstructure to the piles. They showed that UPRF could increase the load-bearing share of the raft relative to that of the concrete piles, which leads to a favourable economic impact. Stone columns (SC) and deep-mixed columns (DMC) have also gained substantial popularity in the last few decades, and have shown pronounced success in substituting concrete pile foundations in numerous projects. This paper is an attempt to explore the viability of using SC and DMC in the UPRF system. Different column parameters such as material, stiffness, spacing, embedment length, configuration and raft thickness may affect the design considerations of UPRF systems. The current study investigates the effect of such parameters on the performance of the UPRF. In addition, two cushion alternatives were also studied: structural fill and EPS Geofoam. 3D finite element models of a 16-storey building on soft clay were used to compare the behaviour of different types of UPRF foundations embedded in different types of soft clays. A coupled hydraulic and mechanical model using the Modified Cam Clay soil model was used to model the soft soil.
1 October 2023 in International Journal of Geomechanics