Antonio Cantiani

Antonio Cantiani

Auto-generated profile, based on publicly available information

Antonio Cantiani

School of Engineering, University of Basilicata, Potenza, Italy

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 March 2024 in Energy Efficiency
Verified
Journal Article
Open access
PDF file
MDMarco D’Amato
Marco D’Amato
ACAntonio Cantiani
Antonio Cantiani
ABAngelo Basso
Angelo Basso
VMVinicio Magi
Vinicio Magi
AVAnnarita Viggiano
Annarita Viggiano
The aim of this work is to exploit the influence of using ozonized air to achieve stable and efficient combustion of lean mixtures in a gasoline-fuelled Spark-Ignition (SI) engine. The influence of ozone on the combustion of near-stoichiometric mixtures, which are typical of SI engines, has also been assessed. A Computational Fluid Dynamics (CFD) model has been employed to simulate compression, combustion, and expansion of a spark ignition, axisymmetric engine fuelled with iso-octane/air/ozone mixtures. The aim is to assess how ozone improves the engine performance under different engine speeds, ignition timings and equivalence ratios. The model has been validated against experimental data available in the literature. Parametric analyses have been carried out by considering three values of engine speeds (800, 1000 and 1200 rpm), three different ozone concentrations at Intake Valve Closure (IVC) (0, 100 and 200 ppm) and two equivalence ratios (0.9 and 0.7). The results show that ozone enables reactions in the Low Temperature Combustion (LTC) regime, modifies the mixture chemical composition and the auto-ignition tendency. Specifically, for all the cases under examination, the addition of ozone to the air/fuel mixture reduces the combustion duration, leading to an increase in terms of work output and a reduction of the specific fuel consumption. Moreover, the advantage of using ozone is greater for lean mixtures than for near-stoichiometric mixtures. Finally, for the near-stoichiometric cases, when the residence time of the mixture is high enough, auto-ignition occurs in the end gases.

29 May 2021 in Energy Technology
Verified
Journal Article
Open access
PDF file
ACAntonio Cantiani
Antonio Cantiani
AVAnnarita Viggiano
Annarita Viggiano
VMVinicio Magi
Vinicio Magi
A novel heat recovery strategy for internal combustion engines is proposed. The aim is to recover thermal energy from the engine exhaust gases and through cylinder walls to heat pressurized water to supercritical conditions and to directly inject such supercritical water into the combustion chamber. Herein, this strategy is applied to a spark ignition, four‐stroke, port fuel injection engine. An in‐house solver, which includes a heat exchanger model, has been developed to conduct numerical simulations of the apparatus. At first, the engine model has been validated by comparing the results with experimental measurements. Then, a parametric analysis has been conducted to maximize the engine efficiency by varying the injection start timing, the injector diameter, and the water/fuel ratio. A single‐objective genetic algorithm has been used to select the optimal set of such parameters. Finally, a multiobjective genetic algorithm has been used to maximize the engine efficiency and minimize the exhaust gas–water heat exchanger size. The results show that the proposed approach may lead to a significant increase in the engine efficiency, up to about 12%.

18 June 2026 in International Journal of Heat and Mass Transfer
Verified
Journal Article
Closed access
DBDavid Barreiro-Villaverde
David Barreiro-Villaverde
ACA. Cantiani
A. Cantiani
MMM.A. Mendez
M.A. Mendez

22 October 2020 in E3S Web of Conferences
Verified
Conference Paper
Open access
PDF file
ACAntonio Cantiani
Antonio Cantiani
AVAnnarita Viggiano
Annarita Viggiano
EFEmanuele Fanelli
Emanuele Fanelli
VMVinicio Magi
Vinicio Magi
Scroll compressors are often used in air conditioning and refrigeration systems thanks to their high efficiency, low noise and vibrations, light weight and high reliability. Scrolls are also widely used as positive displacement expanders in small-scale power generation systems, such as Organic Rankine Cycles (ORCs). In recent years, the research has focused on the development of mathematical models that help to predict the scroll expander performances under different operating conditions. In this work, a quasi-dimensional model of a scroll expander of an Organic Rankine Cycle unit is presented. Such an expander consists of two identical circle involute spirals, with appropriate starting segments. Specifically, the model is able to design the scroll expander geometry with either a “circular cutter” or a “perfect mesh profile” (PMP) approach, which are two of the most common scroll geometry starting segments. As regards the thermo-fluid dynamic aspects, specific sub-models have been used to account for radial and axial leakage, wall heat transfer, intake and exhaust of the working fluid. The model has been validated with available experimental data in order to assess its accuracy and, at the same time, to calibrate the implemented sub-models. The influence of some geometrical parameters on the expander performances has been assessed. In particular, a study of the influence of the wrap geometry is presented. The results show that the circular cutter approach returns better performances at the expenses of a higher mass consumption. Nevertheless, the circular cutter modification returns a higher specific work. Lastly, the influence of one of the PMP parameters on performances has been assessed. The results show a fairly strong dependence of both mechanical power and specific work, suggesting that the global optimization of all geometric parameters of the scroll expander may radically improve its performances.

2 October 2026 in International Journal of Heat and Mass Transfer
Verified
Journal Article
Closed access
ACA. Cantiani
A. Cantiani
ANA. Novi
A. Novi
DGD. Gutierrez-Gonzalez
D. Gutierrez-Gonzalez
JSJ. Steelant
J. Steelant