LoRa, as a representative of Low Power Wide Area Network technology, has attracted significant attention from both academia and industry. However, the current understanding of LoRa is far from complete, and implementations have a large performance gap in SNR and packet reception rate. This article presents a comprehensive understanding of LoRa physical layer protocol (PHY) and reveals the fundamental reasons for the performance gap. We present the first full-stack LoRa PHY implementation with a provable performance guarantee. We enhance the demodulation to work under extremely low SNR (-20 dB) and analytically validate the performance, where many existing works require SNR > 0. We derive the order and parameters of decoding operations, including dewhitening, error correction, deinterleaving, and so on, by leveraging LoRa features and packet manipulation. We implement a complete real-time LoRa on the GNU Radio platform and conduct extensive experiments. Our method can achieve (1) a 100% decoding success rate while existing methods can support at most 66.7%, (2) -142 dBm sensitivity, which is the limiting sensitivity of the commodity LoRa, and (3) a 3,600-m communication range in the urban area, even better than commodity LoRa under the same setting.
LoRa, as a representative Low-Power Wide-Area Network (LPWAN) technology, holds tremendous potential for various city and industrial applications. However, as there are few real large-scale deployments, it is unclear whether and how well LoRa can eventually meet its prospects. In this paper, we demystify the real performance of LoRa by deploying and measuring a citywide LoRa network, named CityWAN, which consists of 100 gateways and 19,821 LoRa end nodes, covering an area of 130 km2 for 12 applications. Our measurement focuses on the following perspectives: (i) Performance of applications running on the citywide LoRa network; (ii) Infrastructure efficiency and deployment optimization; (iii) Physical layer signal features and link performance; (iv) Energy profiling and cost estimation for LoRa applications. The results reveal that LoRa performance in urban settings is bottlenecked by the prevalent blind spots, and there is a gap between the gateway efficiency and network coverage for the infrastructure deployment. Besides, we find that LoRa links at the physical layer are susceptible to environmental variations, and LoRa and other LPWANs show diverse costs for different scenarios. Our measurement provides insights for large-scale LoRa network deployment and also for future academic research to fully unleash the potential of LoRa.
This paper introduces ChirpTransformer, a versatile LoRa encoding framework that harnesses broad chirp features to dynamically modulate data, enhancing network coverage, throughput, and energy efficiency. Unlike the standard LoRa encoder that offers only single configurable chirp feature, our framework introduces four distinct chirp features, expanding the spectrum of methods available for data modulation. To implement these features on commercial off-the-shelf (COTS) LoRa nodes, we utilize a combination of a software design and a hardware interrupt. ChirpTransformer serves as the foundation for optimizing encoding and decoding in three specific case studies: weak signal decoding for extended network coverage, concurrent transmission for heightened network throughput, and data rate adaptation for improved network energy efficiency. Each case study involves the development of an end-to-end system to comprehensively evaluate its performance. The evaluation results demonstrate remarkable enhancements compared to the standard LoRa. Specifically, ChirpTransformer achieves a 2.38 × increase in network coverage, a 3.14 × boost in network throughput, and a 3.93 × of battery lifetime.
28 December 2021 in IEEE Transactions on Mobile Computing
LoRa, as a representative Low-Power Wide Area Network (LPWAN) technology, has emerged as a promising platform for connecting the Internet of Things (IoTs). It enables low-rate communications over upto tens of kilometers with a 10-year battery lifetime. However, practical LoRa deployments suffer from collisions, given the dense deployment of devices and the wide coverage area. We propose CoLoRa, an approach to decompose large numbers of concurrent transmissions from one collision and enable multi-packet reception in LoRa networks. At the heart of CoLoRa, we utilize the packet time offset to disentangle collided packets. CoLoRa incorporates several novel techniques to address practical challenges. (1) We translate time offset, which is difficult to measure, to frequency features that can be reliably measured. (2) We propose a method to extract peak features from low-SNR LoRa signals iteratively. (3) We address frequency shift incurred by carrier frequency offset and time offset for LoRa decoding. We implement CoLoRa on USRP N210 and evaluate its performance in both indoor and outdoor networks. CoLoRa is implemented in software at the base station, and it can work for COTS LoRa nodes. The evaluations show that CoLoRa improves the network throughput by 3.4× compared with Choir and 14× compared with LoRaWAN.
Inefficient data transmission has been a development bottleneck of Vehicular Ad-hoc NETworks (VANETs), especially in urban areas. It has been proved that many complex IP-based solutions are difficult to be applied in the highly dynamic and link-interrupted vehicular environment. In recent years, Named Data Networking (NDN) has become the most popular realization of Information-Centric Networking (ICN) for future networks. Its characteristics of multi-source, multi-path and in-network caching are helpful for improving the data transmission in VANETs. However, the bottom layer of vehicles cannot provide multiple interfaces to different domains like the routers in wired networks. Thus interface-based forwarding degenerates into directionless broadcasting with low performance and high overhead. Against this problem, we propose COMPASS, a novel named data transmission protocol for VANETs. Firstly, a dynamic directional interface model is built as the cornerstone of our COMPASS. Secondly, the forwarding strategies are improved for rapid interest dissemination and named data retrieving. Besides, an interface remapping method and the update strategies of Forwarding Information Base (FIB) and Pending Interest Table (PIT) are designed to enhance the robustness in high-mobility environment. Finally, the performance of COMPASS is verified on ndnSIM. Compared with the other three state-of-the-art protocols, COMPASS obtains the highest interest satisfaction ratio and the shortest transmission delay in urban traffic scenarios with restricted communication and storage overhead.
WiFi backscatter localization is a promising technology for the Internet of Things. However, existing works cannot work well for large-scale and low-cost tags with commodity WiFi devices. We present Willow, which provides accurate localization for parallel backscatter tags with commodity WiFi devices. We design a packet-level orthogonal backscatter modulation method to generate multiple orthogonal backscatter signals and support in-band backscatter with ambient WiFi. We show that backscatter signals can be effectively extracted even under strong in-band interference. To work in real WiFi traffic, we propose adaptive packet selection-based modulation to guarantee the orthogonality of backscatter signals. For parallel localization, we propose an iterative inter-tag interference cancellation method and a location filtering method to remove location ambiguity. We theoretically analyze the effectiveness of our method in supporting parallel tags. We prototype Willow tags using low-cost hardware and implement Willow AP on commodity WiFi NIC AX200. Through extensive experiments, we show that Willow achieves a median localization error of 27 cm and supports 51 parallel tags, which is 2× and 17× better than the state-of-the-art method.