In recent years, the implementation of Tier 5 emission regulations for tractors has compelled manufacturers to conduct new research. Additionally, the process of hybridization has impacted the agricultural vehicle industry. This study focuses on the design and implementation of an energy management strategy (EMS) for a diesel–electric hybrid electric agricultural vehicle, based on real‐time optimization. Tractor drive systems, including both conventional and hybrid options, were introduced. Simulations were performed to compare fuel consumption and CO2 emissions between the two types of tractors. The data shows that hybrid vehicles produce 8.93% less CO2 than conventional vehicles. Furthermore, the fuel consumption of the tractor decreased from 1,880.2 to 1,712.5 g/km under hybrid operating conditions.
31 December 2023 in The European Journal of Research and Development
Despite diesel engine technology seems close to be ending with decrease of electrical vehicles, it still has potential in marine, heavy-duty, and industrial areas. Marine diesel engines are frequently encountered in yachts, towing boats, and sailing boats. The cooling fluid is sea water in marine engines. The engine coolant water is cooled by shell and tube heat exchangers. Charge air is cooled by fin-and-tube type heat exchangers. In this study, fin-and-tube type heat exchanger’s design and flow analysis were investigated for the prototype six-cylinder inline engine. Heat exchanger’s header geometry was optimized to increase heat transfer, and an acceptable header design was decided upon with the analysis results.
31 December 2023 in Orclever Proceedings of Research and Development
The exhaust manifold is one of the engine parts in internal combustion engines that operates under the influence of high temperatures. To prevent issues arising from the expansion movement due to high temperature effects, the exhaust manifold of a 6-cylinder commercial diesel engine has been designed in three parts. Sealing rings that can withstand high temperatures are used in the three-part exhaust manifold to prevent gas leaks. For the exhaust manifold, 1-dimensional, thermal, flow, and structural analyses have been performed. Initially, based on the structural analysis of the exhaust manifold conducted without sealing rings, sealing ring selection was made according to the deformation values of the exhaust manifold. In the structural analysis, the PEEQ (equivalent plastic strain) method, which is utilized to determine the thermomechanical fatigue crack initiation area, is employed. In this study, an approach using this method was undertaken, and the crack initiation area was examined.