14 January 2016 in Environmental Science & Technology
16 May 2019 in Environmental Science & Technology
Diesel-powered road vehicles are important sources for nitrogen oxide (NOx) emissions and the European passenger fleet is highly dieselised, which has resulted in many European roadside environments being non-compliant with legal air quality standards for nitrogen dioxide (NO2). Based on vehicle emission remote sensing data for 300 000 light-duty vehicles across the United Kingdom, light-duty diesel NOx emissions were found to be highly dependent on ambient temperature with low temperatures resulting in higher NOx emissions, i.e., a "low temperature NOx emission penalty" was identified. This feature was not observed for gasoline-powered vehicles. Older Euro 3 to 5 diesel vehicles emitted NOx similarly, but vehicles compliant with the latest Euro 6 emission standard, emitted less NOx than older vehicles and demonstrated less of an ambient temperature dependence. This ambient temperature dependence is overlooked in current emission inventories, but is of importance from an air quality perspective. Owing to Europe's climate, a predicted average of 38 % more NOx emissions have burdened Europe when compared to temperatures encountered in laboratory test cycles. However, owing to the progressive elimination of vehicles demonstrating the most severe low temperature NOx penalty, light-duty diesel NOx emissions are likely to decrease more rapidly throughout Europe than currently thought.
2 December 2020 in Environmental Science & Technology
In this study, we use comprehensive vehicle emission remote sensing measurements of over 230,000 passenger cars to estimate total UK ammonia (NH3) emissions. Estimates are made using “top-down” and “bottom-up” methods that demonstrate good agreement to within 1.1% for total fuel consumed or CO2 emitted. A central component of this study is the comprehensive nature of the bottom-up emission estimates that combine highly detailed remote sensing emission data with over 4000 km of 1 Hz real driving data. Total annual UK NH3 emissions from gasoline passenger cars are estimated to be 7.8 ± 0.3 kt from the bottom-up estimate compared with 3.0 ± 1.7 kt reported by the UK national inventory. An important conclusion from the analysis is that both methodologies confirm that gasoline passenger car NH3 emissions are underestimated by a factor of about 2.6 compared with the 2018 UK National Atmospheric Emissions Inventory. Furthermore, we find that inventory estimates of urban emissions of NH3 for passenger cars are underestimated by a factor of 17.
24 July 2015 in Environmental Science & Technology
Organic nitrogen (ON) compounds are present in atmospheric particulate matter (PM), but compared to their inorganic, hydrocarbon, and oxygenated counterparts, they are difficult to characterize due to their low concentrations in complex matrices. Nitrosamines are a class of ON compounds known to be highly carcinogenic and include species formed from nicotine degradation, but there are no detailed estimates of their abundance in ambient air. We use a highly sensitive analytical method, which is capable of separating over 700 ON compounds, to determine daily variability in nicotine, and 8 nonspecific and 4 tobacco-specific nitrosamines in ambient PM from central London over two periods in winter and summer. The average total nitrosamine concentration was 5.2 ng m–3, substantially exceeding a current public recommendation of 0.3 ng m–3 on a daily basis. The lifetime cancer risk from nitrosamines in urban PM exceeded the U.S. Environmental Protection Agency guideline of 1 excess cancer case per 1 million population exposed after 1 h of exposure to observed concentrations per day over the duration of an adult lifetime. A clear relationship between ambient nitrosamines and total PM2.5 was observed with 1.9 ng m–3 ± 2.6 ng m–3 (total nitrosamine) per 10 μg m–3 PM2.5.
10 November 2016 in Scientific Reports
Cooking is widely recognized as an important source of indoor and outdoor particle and volatile organic compound emissions with potential deleterious effects on human health. Nevertheless, cooking emissions remain poorly characterized. Here the effect of herbs and pepper on cooking emissions was investigated for the first time to the best of our knowledge using state of the art mass spectrometric analysis of particle and gas-phase composition. Further, the secondary organic aerosol production potential of the gas-phase emissions was determined by smog chamber aging experiments. The emissions of frying meat with herbs and pepper include large amounts of mono-, sesqui- and diterpenes as well as various terpenoids and p-cymene. The average total terpene emission rate from the use of herbs and pepper during cooking is estimated to be 46 ± 5 gg-1Herbsmin-1. These compounds are highly reactive in the atmosphere and lead to significant amounts of secondary organic aerosol upon aging. In summary we demonstrate that cooking with condiments can constitute an important yet overlooked source of terpenes in indoor air.
1 October 2020 in Science of The Total Environment
Vehicle emission remote sensing has the potential to provide detailed emissions information at a highly disaggregated level owing to the ability to measure thousands of vehicles in a single day. Fundamentally, vehicle emission remote sensing provides a direct measure of the molar volume ratio of a pollutant to carbon dioxide, from which fuel-based emissions factors can readily be calculated. However, vehicle emissions are more commonly expressed in emission per unit distance travelled e.g. grams per km or mile. To express vehicle emission remote sensing data in this way requires an estimate of the fuel consumption at the time of the emission measurement. In this paper, an approach is developed based on vehicle specific power that uses commonly measured or easily obtainable vehicle information such as vehicle speed, acceleration and mass. We test the approach against 55 independent comprehensive PEMS measurements for Euro 5 and 6 gasoline and diesel vehicles over a wide range of driving conditions and find good agreement between the method and PEMS data. The method is applied to individual vehicle model types to quantify distance-based emission factors. The method will be appropriate for application to larger vehicle emission remote sensing databases, thus extending real-world distance-based vehicle emissions information.