1 February 2002 in Automatica
1 February 2002 in Systems & Control Letters
10 March 2003 in IEEE Transactions on Automatic Control
We study in this paper the theory and applications of a nonlinear control technique, i.e., the so-called composite nonlinear feedback control, for a class of linear systems with actuator nonlinearities. It consists of a linear feedback law and a nonlinear feedback law without any switching element. The linear feedback part is designed to yield a closed-loop system with a small damping ratio for a quick response, while at the same time not exceeding the actuator limits for the desired command input levels. The nonlinear feedback law is used to increase the damping ratio of the closed-loop system as the system output approaches the target reference to reduce the overshoot caused by the linear part. It is shown that the proposed technique is capable of beating the well-known time-optimal control in the asymptotic tracking situations. The application of such a new technique to an actual hard disk drive servo system shows that it outperforms the conventional method by more than 30%. The technique can be applied to design servo systems that deal with "point-and-shoot" fast targeting.
1 February 2001 in IEEE Transactions on Education
The Internet provides a new environment for developing a variety of applications for educational and research purposes. This paper presents the implementation of a web-based laboratory experiment on a coupled tank apparatus, a multi-input-multi-output (MIMO) system. The web-based laboratory has been developed to serve students and staff in the Department of Electrical Engineering at the National University of Singapore (NUS). The laboratory is an educational tool for teaching students the basic principles and methodology in performing a series of experiments on a coupled tank apparatus at any time and from any location through the Internet. With the capability to implement strategies for manual, proportional integral derivative (PID), general state-space, and fuzzy logic control, the laboratory also provides a platform for research staff to test control algorithms. Video conferencing has been used to provide audio and video feedback, with a camera mounted on a movable platform so that the user can control both the zooming and viewing angle.
14 May 2013 in International Journal of Control
This paper analytically characterises optimal sensor placements for target localisation and tracking in 2D and 3D. Three types of sensors are considered: bearing-only, range-only and received-signal-strength. The optimal placement problems of the three sensor types are formulated as an identical parameter optimisation problem and consequently analysed in a unified framework. Recently developed frame theory is applied to the optimality analysis. We prove necessary and sufficient conditions for optimal placements in 2D and 3D. A number of important analytical properties of optimal placements are further explored. In order to verify the analytical analysis, we present a gradient control law that can numerically construct generic optimal placements.