Titanomagnetites in mid‐ocean ridge basalt (MORB) experience variable post crystallization alterations associated with seafloor tectonic and environmental processes. Compared to low‐temperature oxidation, seafloor hydrothermal alteration is thought to be more destructive but its magnetic aftermaths are insufficiently documented. Here we present comprehensive rock magnetic and electron microscopic analyses of fresh and hydrothermally‐altered MORBs dredged from the Longqi and Yuhuang hydrothermal fields, Southwest Indian Ridge. We observe large variations in magnetic properties of fresh MORBs, originated from relative proportions of nano‐scale single‐domain to vortex state and micron‐scale vortex to multi‐domain state dendritic titanomagnetites. Progressive hydrothermal alteration produces secondary magnetite through recrystallization of exsolved and dissolved Fe from primary titanomagnetite. Exsolution is evident by a dual Verwey transition signature and coexisting Ti‐poor titanomagnetites and sphenes in partially chloritized basalts. A schematic model is proposed to explain the variations in magnetomineralogy and magnetic properties with progressive hydrothermal alteration. Intermediate hydrothermal alteration products retain a secondary chemical remanent magnetization (CRM) which is related to the long‐term magnetization variations in oceanic basalts. The established framework allows characterizing MORB hydrothermal alteration and ultimately contributes to resolving the complexity of seafloor magnetism.
2 November 2022 in Journal of Geophysical Research: Solid Earth
The self‐potential (SP) method is expected to play an important role in the exploration of seafloor massive sulfide (SMS) resources. Since the redox potential changes with depth below the seafloor, SMS deposits are the source of an electrical (source) current density, generating in turn a recordable electrical field. This electrical field can be remotely measured at and above the seafloor. By integrating this electrical field, we obtained a so‐called SP profile or map. The electrical conductivity distribution of SMS deposits is an important ingredient in the inversion of these SP data in order to distinguish between causative primary sources (i.e., associated with the SMS deposits themselves) and secondary current sources associated with conductivity contrasts below the seafloor. Such ingredient is therefore necessary to properly localize SMS deposits and eliminating ghosts associated with high conductivity contrasts. The conductivity structure of the seafloor is however unknown in most SP surveys. This study presents the first joint interpretation of transient electromagnetic and SP surveys. The field data were acquired at the Trans‐Atlantic Geotraverse (TAG) hydrothermal mound. The conductivity structure of TAG mound was obtained by inverting transient electromagnetic data. This electrical conductivity distribution is then used to invert the SP data. The obtained (primary) source current distribution delineates the geometry of the SMS deposits. The deposits are located in the center of the mound as well as at its edges, in a way that is consistent with water column data. Combining the two geophysical methods improves our ability to better decipher the fine geometry of SMS deposits below the seafloor.
Seafloor massive sulfide (SMS) deposits contain abundant metals, such as Cu, Zn, Au, and Ag, which are of growing economic interest. Currently, the exploration of SMS deposits has entered into a new stage of resource assessment, so we need a geophysical method to rapidly obtain the 3D structure of these SMS deposits. We report here a self-potential (SP) survey performed with an autonomous underwater vehicle (AUV) at the Yuhuang hydrothermal field on the ultraslow-spreading Southwest Indian Ridge with a water depth ranging from 1300 m to 2200 m. The electric-field sensors are attached to the tail of the AUV to record the electric field approximately 50 m above the seafloor. The electric field strength is observed to reach an amplitude of 0.6 mV/m at this known SMS deposit. SP tomography is used to obtain the 3D structure of the ore body, and benchmark numerical tests are first performed on synthetic cases to optimize the inversion algorithm parameters to estimate the ore location. The 3D SP tomography reveals a south-sloping ore body, which is 100 m long in the north–south direction and nearly 200 m long in the east–west direction. The vertical extent of the ore body is approximately 100 m. These results suggest that an AUV-based SP survey and tomography are potentially useful exploration methods to characterize the geometry of SMS deposits. This method may play an important role in resource assessment in concert with other geophysical methods, such as magnetic and induced-polarization surveys.
24 May 2024 in Journal of Geophysical Research: Solid Earth