17 July 2012 in Rapid Communications in Mass Spectrometry
10 October 2005 in Journal of Microelectromechanical Systems
A wafer-scale, batch fabrication process for constructing quadrupole mass spectrometers using microelectromechanical systems (MEMS) technology is described. The device is formed from two bonded silicon-on-insulator (BSOI) substrates, which are attached together to form a monolithic block. Deep etched features and springs formed in the outer silicon layers are used to locate cylindrical metal electrode rods, while similar features formed in the inner silicon layers are used to define integrated ion entrance and exit optics. The precision of the assembly is determined by lithography and deep etching, and by the mechanical definition of the bonded silicon layers. Mass filtering is demonstrated, with a mass range of /spl ap/ 400 a.m.u. and a mass resolution of 1 a.m.u. at 219 a.m.u., using quadrupoles with rods of 500 /spl mu/m diameter and 30 mm length, operating at 6 MHz RF frequency.
28 January 2010 in Analytical Chemistry
23 February 2015 in Analytical Chemistry
Miniaturized mass spectrometers are becoming increasingly capable, enabling the development of many novel field and laboratory applications. However, to date, triple quadrupole tandem mass spectrometers, the workhorses of quantitative analysis, have not been significantly reduced in size. Here, the basis of a field-deployable triple quadrupole is described. The key development is a highly miniaturized ion optical assembly in which a sequence of six microengineered components is employed to generate ions at atmospheric pressure, provide a vacuum interface, effect ion guiding, and perform fragmentation and mass analysis. Despite its small dimensions, the collision cell efficiently fragments precursor ions and yields product ion spectra that are very similar to those recorded using conventional instruments. The miniature triple quadrupole has been used to detect thiabendazole, a common pesticide, in apples at a level of 10 ng/g.
8 January 2016 in Journal of Micromechanics and Microengineering
This paper reviews mass spectrometers based on micro-electro-mechanical systems (MEMS) technology. The MEMS approach to integration is first briefly described, and the difficulties of miniaturizing mass spectrometers are outlined. MEMS components for ionization and mass filtering are then reviewed, together with additional components for ion detection, vacuum pressure measurement and pumping. Mass spectrometer systems containing MEMS sub-components are then described, applications for miniaturized and portable systems are discussed, and challenges and opportunities are presented.
1 May 1996 in Surface Science