Renata Carla Tavares dos Santos Felipe

Renata Carla Tavares dos Santos Felipe

Auto-generated profile, based on publicly available information

Renata Carla Tavares dos Santos Felipe

Instituto Federal de Educação Ciência e Tecnologia do RN

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 March 2017 in Materials Research
Verified
Journal Article
Open access
PDF file
RFRenata Carla Tavares dos Santos Felipe
Renata Carla Tavares dos Santos Felipe
RFRaimundo Nonato Barbosa Felipe
Raimundo Nonato Barbosa Felipe
ABAna Claudia de Melo Caldas Batista
Ana Claudia de Melo Caldas Batista
EAEve Maria Freire Aquino
Eve Maria Freire Aquino
In an effort to show the influence of the hybridization method in hybrid fabric reinforced composites within the characteristic of the fracture and the mechanical properties, two laminate reinforced with bi-directional woven were developed, where one of them was reinforced with a hybrid strand (hybrid strand composite laminate) and the other with a different strands (hybrid fabric composite laminate). Both laminates used polyester resin, Kevlar-49 and glass-E fibers, had four layers and were prepared industrially by hand lay-up manufacturing. The percentages by weight of fiberglass and Kevlar in each type of woven are equal. The hybrid strand composite laminate showed a higher tensile strength, however the hybrid fabric composite laminate showed superior properties in three-point bending test, for example, 41.7 % superiority in flexural strength. The results showed that the hybridization method in hybrid reinforced composites influences the mechanical behavior of laminates and the formation and spread of damage.


9 November 2012 in Journal of Reinforced Plastics and Composites
Verified
Journal Article
Closed access
PDF file
RFRnb Felipe
Rnb Felipe
RFRcts Felipe
Rcts Felipe
EAEmf Aquino
Emf Aquino
In this study, a glass fiber reinforced plastic sheet was analyzed to study the environmental deterioration (aging) on its surface, when placed in a chamber built for this purpose, and the mechanical behavior when subjected to uniaxial tension was also studied. The environmental deterioration of the sheet in the chamber (aging chamber) occurred in three different ways: in the first, the sheets were subjected to alternative exposure of vapor and UV radiation; in the second it was exposed just to UV radiation, and in the third it was exposed simply to vapor. The main objective of this arrangement was to find out which of the agents tested will contribute more on the deterioration (aging) of the sheet surface, as in a structural laminate, the outside sheet that is being exposed to, could suffer the same type of damage under the conditions studied. Techniques for thickness measurements, and the surface analysis using an optical microscope, a scanner and scanning electron microscope were used. For the determination of the uniaxial tensional properties, a universal testing instrument was used. Almost all the results showed that there is a direct influence on the environmental deterioration on each and every parameter studied.

23 February 2020 in Journal of Composite Materials
Verified
Journal Article
Closed access
PDF file
JSJayna Kátia Dionísio dos Santos
Jayna Kátia Dionísio dos Santos
RCRayane Dantas da Cunha
Rayane Dantas da Cunha
WJWanderley Ferreira de Amorim Junior
Wanderley Ferreira de Amorim Junior
RFRenata Carla Tavares dos Santos Felipe
Renata Carla Tavares dos Santos Felipe
JNJosé Lira Braga Neto
José Lira Braga Neto
RJRaimundo Carlos Silverio Freire Júnior
Raimundo Carlos Silverio Freire Júnior
The aim of this study was to analyze the effect of hybridization on impact and residual strength in composites as well as the types of damage caused by the impacts, quantifying the delaminated area of the test specimens. Two 11-layer composite laminates were developed, one with bidirectional glass fiber woven and the other a hybrid with three layers of bidirectional aramid fiber substituting the outer layers and the middle layer of the glass fiber. The materials revealed that the hybrid laminate obtained greater impact strength withstanding one impact of 76 J, albeit with an increase in the damaged area of between 64 and 85 cm2, resulting in a decline in mechanical properties along nearly the entire test specimen. This contrasts with what occurred in the glass fiber laminates, which recovered over 80% of their mechanical properties for a distance of 35 mm from the edge of the impactor. Moreover, it demonstrated that the variation in residual strength can be represented by an equation and that there is a relation between the damage area and the residual properties of the glass fiber material.

10 October 2019 in Journal of Composite Materials
Verified
Journal Article
Closed access
PDF file
YDYldeney Silva Domingos
Yldeney Silva Domingos
RFRenata Carla Tavares dos Santos Felipe
Renata Carla Tavares dos Santos Felipe
RFRaimundo Nonato Barbosa Felipe
Raimundo Nonato Barbosa Felipe
GFGlauber José Turolla Fernandes
Glauber José Turolla Fernandes
This paper presents an evaluation of the mechanical and physical behavior of the type E glass fiber-reinforced polymeric composite when exposed to environmental aging agents in an effluent treatment plant. The composite was made by the hand layup process, and the test bodies were made according to the American Society for Testing and Materials standards D3039-14 and D790-10 for the uniaxial tensile and three-point bending tests, respectively, where they were exposed for a period of eight months, conditioned above and immersed in the effluent of the treatment plant. The physicochemical characterization of the effluent was evaluated considering the following parameters: pH, conductivity, sulfate, alkalinity, acidity, sulfide, and temperature, aiming to characterize the effluent conditions in direct and indirect contact with the composite. After the exposure period, tests were carried out for morphological evaluation, structural integrity evaluation, mechanical performance evaluation, and fracture characterization of the polymer composite, thereby leading to a comparison of the mechanical characteristics in the original state to that of the aged state (after exposure in the effluent treatment plant). The polymeric composite studied was stable after the aging period, with little mass variation, less than 0.5%, and slight changes in color. The mechanical properties evaluated also did not change significantly during the study period. Variations in uniaxial tensile strength were less than 1.4% and for three-point bending less than 10%, thus showing that the type E glass fiber-reinforced polymer composite has potential for use in harsh environments such as in effluent treatment plants.

26 September 2011 in HOLOS
Verified
Journal Article
Open access
PDF file
JSJayna K. Dionisio Santos
Jayna K. Dionisio Santos
RCRicardo Alex D. Cunha
Ricardo Alex D. Cunha
RFRenata Carla Tavares Dos Santos Felipe
Renata Carla Tavares Dos Santos Felipe
RFRaimundo Nonato B. Felipe
Raimundo Nonato B. Felipe
GMGilson Medeiros
Gilson Medeiros
The use of composites in manufacturing equipment and products is taking a very important space in the industry in general. Moreover these materials have unique characteristics when analyzed separately from constituents who are part of them. However it is know that cares must be taken in their manufacture, as the use of appropriate process and the composition of each element, in addition to adherence fiber / matrix, which is a major factor in obtaining of the final mechanical strength of the product. One should also take into account whether the composites are environmentally friendly. For this reason, in this work, a composite partially ecological was made, using as reinforcement, a sisal woven and, as matrix, the polyester resin. Seeking to improve the adherence fiber / matrix, a treatment in sisal woven was performed with aqueous solution of sodium hydroxide (NaOH) at a concentration of 3%. The composite subjected to this treatment presented, in bending test, a better mechanical performance, with an increase of 27% in the flexion strength and of 54% in maximum strain, but there was a reduction of about 15% in its flexural modulus.