26 January 2021 in IEEE Transactions on Industry Applications
This article proposes a novel optimal sizing method for the energy station in the multienergy system (MES) integrated with data center. First, an overall framework of the energy station, data center, and multienergy loads is constructed to describe the interconnection of energy system and information system. Then, the dynamic voltage frequency scaling (DVFS) technique, the thermal inertia, and the deep coupling relationships of the electricity load, waste heat, cooling load, and workload in the data center are respectively modeled. On this basis, the optimal sizing model of the energy station is established, in which the data center can participate in the integrated demand response by the DVFS technique and thermal inertia. The capacity of energy station and the scheduling schemes of energy devices and servers are optimized simultaneously to coordinate the energy flow and information flow. Based on the quasi-steady-state assumption of thermal balance, the model is simplified to a mixed-integer quadratic program problem, and it is solved by Gurobi. Case studies based on a real-world test system in China illustrate that the integration of data center can be utilized to reduce the total cost of energy station planning in MES.
2 July 2021 in IEEE Transactions on Industry Applications
Probabilistic multienergy flow (PMEF) analysis is the fundamental of planning and operation of integrated energy systems (IES) considering uncertainties. The injection of hydrogen will make the PMEF calculation more complex and can deeply affect the distribution of energy flows. This article studies an efficient PMEF calculation method which can obtain the probabilistic information of electricity–gas IES with hydrogen injection. First, the steady-state model of electricity–gas IES with hydrogen injection is established, in which the gas network with hydrogen injection is formulated in compact matrix form. Second, the Jacobian matrix for the steady-state model of electricity–gas IES with hydrogen injection is derived. Third, the cumulant method and Nataf transformation are applied to calculate the PMEF considering the correlations. Finally, case studies are carried out on a coupled IES, which consists of modified IEEE 33-bus electricity system and 11-node gas system. The results demonstrate that the proposed PMEF method can reduce computational time greatly while keeping high computational accuracy when compared with the Monte–Carlo simulation method.
17 July 2023 in IEEE Transactions on Power Systems
With the digitalization of energy systems, data centers are gradually becoming an integral part of energy hubs (EHs). Considering the spatiotemporal load regulation of data centers, this article proposes a novel multi-stage coordinated planning model for multiple EHs, which can co-optimize the structure and capacity of each EH, as well as interconnected lines and pipes among multiple EHs. First, a digraph-based computerized modeling method is developed to describe the structures of different EHs. Then, the workload allocation, multi-energy consumption, and service quality of data centers are modeled in sequence to illustrate the tight coupling relationships of energy flow and workload flow. On this basis, the coordinated planning model of multiple EHs is established with the objective function of minimizing the total cost, which is mainly subjected to the constraints of energy device selection, inside topology design, multi-energy load balance, workload balance, and risks. Case studies are carried out on a test system in north China to verify the effectiveness of the proposed planning method.