16 July 2025 in American Journal of Civil Engineering
This study evaluates the mechanical and permeability performance of a Modified Pervious Concrete Pavement (MPCP) developed for urban infrastructure in Bangladesh. The MPCP incorporates lime mortar, selected for its binding properties, and recycled plastic bottle fibers, introduced to enhance tensile strength, crack resistance, and durability. A series of mix designs were developed and tested to assess the effects of varying proportions of lime mortar and plastic fibers on the structural and hydraulic characteristics of the pavement. Among the tested configurations, the A5 mix (cement: lime mortar: aggregate = 1:0.25:3) demonstrated an effective balance between strength and porosity. It achieved a 28-day compressive strength of 18.445 MPa and a porosity of 17.01%, meeting functional criteria for pervious pavement applications. Additionally, the A5 mix exhibited a high infiltration rate of 483.362 mm/hour, supporting its suitability for stormwater management in flood-prone areas. The experimental findings indicate that the integration of lime mortar and recycled plastic fibers can improve both mechanical and permeability characteristics of pervious concrete without compromising its fundamental design properties. The use of locally sourced and waste-derived materials further supports resource-efficient construction practices. This study provides a framework for the development of structurally sound and hydraulically functional pervious pavement systems tailored to the environmental and infrastructural context of Bangladesh.
1 January 2025 in Advances in Civil Engineering
Cement used as binding material in concrete has significant impact on environment due to the emission of NO 2 , SO 2 , CO, CO 2 , dioxins, furans and particulate matter. The average values of NO 2 and SO 2 emissions are 117.09 and 1154.82 μg/m 3 , respectively. About 1 ton of carbon dioxide is emitted into the atmosphere in the production process of 1 ton of cement. Therefore, there is a scope for developing sustainable and cost‐effective concrete for the construction industry. This research presents the potential uses of sugarcane bagasse ash (SBA) as a replacement for ordinary portland cement (OPC). Four different percentages (0%, 3%, 6% and 9%) by weight of SBA were used as the replacement for cement to prepare 20 MPa concrete. Firstly, the properties of cement with different percentages of SBA were determined experimentally. The initial and final setting time, normal consistency and the compressive strength at 3, 7 and 28 days curing period were measured in the laboratory. Secondly, a total of 12 cylindrical specimens with different percentages by weight of SBA were prepared and tested at 28‐day curing period. Test results showed that a 3% replacement of OPC with SBA met standard requirements for setting time, normal consistency, and compressive strength. Notably, the compressive strength of concrete increased significantly at the 3% SBA level compared to the control mix. Economic analysis revealed that using 3% SBA could reduce costs by 87 BDT per cubic metre of concrete. For a practical highway project in Rajshahi City Corporation, this replacement translated into a relative slab thickness of a rigid pavement of 29 mm and a relative cost of 82.23%. These findings demonstrate that SBA possesses cementitious properties and can serve as an eco‐friendly alternative material while reducing construction costs.