Sylvie Grugeon

Sylvie Grugeon

Auto-generated profile, based on publicly available information

Sylvie Grugeon

Laboratoire de Réactivité et Chimie des Solides, CNRS UMR 7314, Université de Picardie Jules Verne, 80039 Amiens, France

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 January 2020 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
PDF file
AMAlexis Maurel
Alexis Maurel
MAMichel Armand
Michel Armand
SGSylvie Grugeon
Sylvie Grugeon
BFBenoit Fleutot
Benoit Fleutot
CDCarine Davoisne
Carine Davoisne
Loïc DupontLoïc Dupont
Loïc Dupont
Additive manufacturing technologies open the way to the direct-integration of electronics and solid-state battery within the final 3D object. Here, a 3D printable polyethylene oxide/lithium bis(trifluoromethanesulfonyl)imide (PEO/LiTFSI) filament (2.18 × 10−3 S cm−1 at 90 °C) optimized to be used as solid polymer electrolyte in a lithium-ion battery is produced to feed a fused deposition modeling (FDM) 3D-printer. Due to its relatively poor mechanical properties compared to classical polymer filament such as polylactic acid (PLA), deep modifications of the 3D-printer were implemented in order to facilitate its printability. The solid polymer electrolyte thermal, structural, morphological, mechanical and electrical characterization is reported. Interestingly, using three different electrochemical impedance spectroscopy sample holders (lateral, sandwich and interdigitated-comb), we demonstrate that conductivity values differs for a same sample, highlighting the PEO chains orientation effect on the conductivity measurements.

1 March 2021 in ECS Journal of Solid State Science and Technology
Verified
Journal Article
Open access
PDF file
AMAlexis Maurel
Alexis Maurel
RRRoberto Russo
Roberto Russo
SGSylvie Grugeon
Sylvie Grugeon
Stephane PanierStephane Panier
Stephane Panier
Loïc DupontLoïc Dupont
Loïc Dupont
In this paper, the development of an environmentally-friendly lithium-terephtalate/polylactic acid (Li2TP/PLA) composite filament, for its use, once 3D-printed via Fused Deposition Modeling (FDM), as negative electrode of a lithium-ion battery is reported. Solvent-free formulation of the 3D-printable filament is achieved through the direct introduction of synthesized Li2TP particles and PLA polymer powder within an extruder. Printability is improved through the incorporation of poly(ethylene glycol) dimethyl ether average Mn∼500 (PEGDME500) as plasticizer, while electrical performances are enhanced through the introduction of carbon black (CB). Thermal, electrical, morphological, electrochemical and printability characteristics are discussed thoroughly. By taking advantage of the 3D-printing slicer software capabilities, an innovative route is proposed to improve the liquid electrolyte impregnation within the 3D-printed electrodes.

1 May 2023 in Journal of the Electrochemical Society
Verified
Journal Article
Closed access
BSBaptiste Salomez
Baptiste Salomez
SGSylvie Grugeon
Sylvie Grugeon
MAMichel Armand
Michel Armand
PTPierre Tran-Van
Pierre Tran-Van
SLStéphane LARUELLE
Stéphane LARUELLE
This paper provides a holistic view of the different studies related to gassing in NMC/graphite lithium-ion batteries over the past couple of decades of scientific development. It underlines the difficulty of predicting the concentration and the proportion of gas released upon cycling and storage and to get a clear mechanistic insight into the reduction and oxidation pathways of electrolyte solvents, the thermal electrolyte degradation, as well as the reactions that involve secondary sources such as water, NMC surface species and cross-talk reactions. Though many relevant experiments such as operando gas analysis using isotope-labeled solvents or two-compartment cells have been conducted, they failed, for instance, to determine the exact mechanism leading to the generation of CO and CO2 gas. Last but not least, this paper discusses different strategies that are currently proposed to reduce or eliminate gassing such as the use of electrolyte additives that enable singlet oxygen quenching or scavenging, NMC coatings that limit the contact with electrolyte and different lithium salts to prevent thermal electrolyte degradation.

8 November 2022 in Scientific Reports
Verified
Journal Article
Open access
PDF file
AMAna C. Martinez
Ana C. Martinez
AMAlexis Maurel
Alexis Maurel
AAAna P. Aranzola
Ana P. Aranzola
SGSylvie Grugeon
Sylvie Grugeon
Stephane PanierStephane Panier
Stephane Panier
EMEric Macdonald
Eric Macdonald
Additive manufacturing, also called 3D printing, has the potential to enable the development of flexible, wearable and customizable batteries of any shape, maximizing energy storage while also reducing dead-weight and volume. In this work, for the first time, three-dimensional complex electrode structures of high-energy density LiNi1/3Mn1/3Co1/3O2(NMC 111) material are developed by means of a vat photopolymerization (VPP) process combined with an innovative precursor approach. This innovative approach involves the solubilization of metal precursor salts into a UV-photopolymerizable resin, so that detrimental light scattering and increased viscosity are minimized, followed by the in-situ synthesis of NMC 111 during thermal post-processing of the printed item. The absence of solid particles within the initial resin allows the production of smaller printed features that are crucial for 3D battery design. The formulation of the UV-photopolymerizable composite resin and 3D printing of complex structures, followed by an optimization of the thermal post-processing yielding NMC 111 is thoroughly described in this study. Based on these results, this work addresses one of the key aspects for 3D printed batteries via a precursor approach: the need for a compromise between electrochemical and mechanical performance in order to obtain fully functional 3D printed electrodes. In addition, it discusses the gaps that limit the multi-material 3D printing of batteries via the VPP process.

23 June 2022 in Electrochimica Acta
Verified
Journal Article
Closed access
AMAna Cristina Martinez
Ana Cristina Martinez
SRSébastien Rigaud
Sébastien Rigaud
SGSylvie Grugeon
Sylvie Grugeon
PTPierre Tran-Van
Pierre Tran-Van
Michel ArmandMichel Armand
Michel Armand
SLStéphane LARUELLE
Stéphane LARUELLE

5 January 2020 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
PDF file
SDShanmukaraj Devaraj
Shanmukaraj Devaraj
PRPierre Ranque
Pierre Ranque
HYHicham Ben youcef
Hicham Ben youcef
TRTeofilo Rojo
Teofilo Rojo
PPPhilippe Poizot
Philippe Poizot
DGDominique Guyomard
Dominique Guyomard
Green energy harvesting (solar and wind) and storage along with electrification of transport sector could bring about a major transformation in the CO2 emission levels that we are currently experiencing. Lithium ion batteries provide an efficient energy storage system to realize this goal. The key developments in Li-ion battery technology starting from solid solution electrodes, intercalation electrodes, conversion electrodes, organic electrodes, and polymer electrolytes with a major focus on the contribution of Michel Armand, an eminent scientist who at a young age saw the future of energy storage, have been elaborated. Moreover, the direction of research that seems interesting to pursue for realizing our goals has also been outlined.