National Laboratory of Solid State Microstructures, College of Engineering and Applied Sciences, Frontiers Science Center for Critical Earth Material Cycling, Jiangsu Physical Science Research Center, Nanjing University, Nanjing 210023, China
Auto-generated profile, based on publicly available information
Han Gao
National Laboratory of Solid State Microstructures, College of Engineering and Applied Sciences, Frontiers Science Center for Critical Earth Material Cycling, Jiangsu Physical Science Research Center, Nanjing University, Nanjing 210023, China
Scalable fabrication of all-perovskite tandem solar cells is challenging because the narrow-bandgap subcells made of mixed lead-tin (Pb-Sn) perovskite films suffer from nonuniform crystallization and inferior buried perovskite interfaces. We used a dopant from Good’s list of biochemical buffers, aminoacetamide hydrochloride, to homogenize perovskite crystallization and used it to extend the processing window for blade-coating Pb-Sn perovskite films and to selectively passivate defects at the buried perovskite interface. The resulting all-perovskite tandem solar module exhibited a certified power conversion efficiency of 24.5% with an aperture area of 20.25 square centimeters.
Commercializing perovskite photovoltaics requires overcoming three critical barriers: the use of toxic solvents in manufacturing, variations in perovskite film quality across large areas, and limited operational reliability. Here, we address these challenges by developing a green solvent–based (γ-valerolactone/2-methyl tetrahydrofuran/dimethylsulfoxide) ink and a solvent-confinement edge-protection strategy, demonstrating large-scale manufacturing of defect-minimized perovskite films under ambient-air conditions. These approaches enabled the production of 7200-square-centimeter perovskite photovoltaic modules that achieved a total-area steady-state efficiency of 17.2% (certified by the National Renewable Energy Laboratory) and that passed all IEC 61215 reliability standards (certified by TÜV Rheinland). This work demonstrates an environmentally responsible path toward commercial manufacturing of perovskite photovoltaics.
All-perovskite tandem solar modules offer the potential to achieve rapid increases in power conversion efficiency (PCE), yet efficient lead-tin (Pb-Sn) subcells often contain thermally unstable methylammonium (MA). Replacing MA with cesium (Cs) has been adopted to improve thermal stability but results in nonuniform nucleation and rapid crystallization, degrading large-area film quality. Here, we introduce p-π conjugated semicarbazide hydrochloride (SHCl) as a crystallization modifier in precursor solutions. The SH + and Cl − ions synergistically modulate the precipitation of Cs components and the growth process of perovskite films, achieving homogeneous nucleation and retarded crystal growth in formamidinium-cesium (FACs)–based Pb-Sn perovskites. Single-junction FACs Pb-Sn devices retained 85% of the initial efficiency after 700 hours at 85°C. The resultant all-perovskite tandem modules (20.25 square centimeters) achieved the certified PCE of 24.3%, representing the highest certified PCE among MA-free all-perovskite tandem modules. Encapsulated modules maintained 90 and 92% of their initial efficiency under ISOS-standardized damp heat (200 hours) and thermal cycling (200 cycles) tests, respectively.