To simulate sheet metal forming processes precisely, an in-house dynamic explicit code was developed to apply a new solid-shell element to sheet metal forming analyses, with a corotational coordinate system utilized to simplify the nonlinearity and to integrate the element with anisotropic constitutive laws. The enhancing parameter of the solid-shell element, implemented to circumvent the volumetric and thickness locking phenomena, was condensed into an explicit form. To avoid the rank deficiency, a modified physical stabilization involving the B-bar method and reconstruction of transverse shear components was adopted. For computational efficiency of the solid-shell element in numerical applications, an adaptive mesh subdivision scheme was developed, with element geometry and contact condition taken as subdivision criteria. To accurately capture the anisotropic behavior of sheet metals, material models with three different anisotropic yield functions were incorporated. Several numerical examples were carried out to validate the accuracy of the proposed element and the efficiency of the adaptive mesh subdivision.
Natural fiber reinforced composites are increasingly used to fabricate structural components prone to suffering low-velocity impacts. The low-velocity impact response of flax fabric reinforced composites under different impact energies is experimentally studied and numerically simulated. A multi-scale finite element analysis strategy for the progressive damage prediction of flax fabric reinforced composites is developed. Micro- and meso-scale analyses are conducted to predict the effective properties of the woven unit cell. Macro-scale analysis is carried out subsequently to predict the impact response of composite laminates using the results of micro- and meso-scale analyses as inputs. Simulation results and experimental results both show that most of the impact energy is absorbed by the specimens when the impact energy is lower than 4 J, and the absorption ratio of impact energy slightly increases with the increase in impact energy. On the contrary, a dramatic decrease occurs in the absorption ratio when the impact energy is 6 J, due to the severe damage to the specimen. In addition, simulation results indicate that matrix shear damage and interlaminar damage are the primary failure modes of composites under high impact energy. The numerical results of impact force, absorbed energy, and damage morphologies on both sides for all specimens show good agreement with the experimental results.
The influence of vibrational loading on the deformation behavior of a Zr50Cu46Al4 metallic glass (MG) was characterized via molecular dynamics approaches. High-frequency (1 GHz) vibrational loading was imposed on the elastoplastic deformation stage during the uniaxial tension of the MG conducted at 50 K. It was found that imposing vibrational loading scarcely reduces the average deformation resistance. On the contrary, it results in a notable residual hardening effect after the vibrational loading is removed, which differs significantly from the previously reported acoustic softening mechanisms. Vibrational loading can increase the fraction of STZed atoms and enhance the shear localization degree, which is beneficial to the shear deformation of MGs. Meanwhile, the influence of vibrational loading on the local microstructure of MG is negligible. A plausible explanation of these phenomena is given by considering the accelerated aging of MG stemming from the β relaxation.