16 September 2005 in Journal of Dynamic Systems, Measurement, and Control
There has been recent interest in novel human-machine collaborative control laws, called “virtual fixtures,” which provide operator assistance for telemanipulation tasks. A forbidden-region virtual fixture is a constraint, implemented in software, that seeks to prevent the slave manipulator of a master/slave telemanipulation system from entering into a forbidden region of the workspace. In this paper, we consider the problem of unstable vibrations of the slave and/or master against forbidden-region virtual fixtures for a general class of telemanipulator control architectures, including those with haptic feedback. To the best of the authors’ knowledge, there has been no rigorous study of the stability of forbidden-region virtual fixtures in previous work. The system is evaluated around the master and slave equilibrium position resulting from a constant desired human input force, using a discrete state-space model. We present a method to analytically determine if instability is possible in the system. We thoroughly evaluate this method, experimentally, applying malicious user strategies that attempt to drive the system unstable. Our approach agrees with experimental results and can be used to design and analyze the stability and transient properties of a telemanipulator interacting with virtual fixtures. We show that the user can affect both slave- and master-side virtual fixture stability by modifying his or her impedance characteristics. However, the upper bound on stable slave-side virtual fixture stiffness does not depend on the particular user.
1 August 2007 in The International Journal of Robotics Research
Pseudo-admittance is introduced as a novel bilateral telemanipulation system that is designed to mimic proportional-velocity admittance control on systems where the master is an impedance-type robot. The controller generalizes to systems with slave robots of the impedance or admittance type. Pseudo-admittance uses a proxy with admittance dynamics combined with direct force feedback from the slave, resulting in unique properties that mimic admittance control and exhibit tremor attenuation and quasi-static transparency. Pseudo-admittance control has potential benefits for tasks that require better-than-human levels of precision, as well as with systems that are typically run under rate control. The controller can also be modified to include virtual fixtures that provide guidance during task execution, while leaving ultimate control of the system with the operator. Guidance virtual fixtures could be used as macros that increase both speed and precision on structured tasks that require direct human control. The properties of the system are verified through simulations and experiments.
1 April 2007 in Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (cat. No.01ch37164)
Microrobots experience physical phenomena that are difficult to model analytically and that are not completely captured with macro-scale prototypes. In this paper we present a reconfigurable robotic measurement system to characterize the magnetic and hydrodynamic properties of assembled-MEMS microrobots. The system consists of a powerful permanent magnet that is position controlled with a linear stage. The magnetic field is accurately characterized. Precision sensors are used to measure magnetic force as a function of applied field. The system is first used to validate an existing model for the magnetic force on a soft-magnetic ellipsoid. Next, the magnetic force on a soft-magnetic assembled-MEMS microrobot as a function of the applied field is measured experimentally. Finally, a vision tracking system is integrated with the setup to measure the hydrodynamic properties of the microrobot. The coefficient of viscous friction for the microrobot is obtained experimentally.
12 March 2007 in IEEE Transactions on Neural Systems and Rehabilitation Engineering
Pulse frequency modulation (PFM) is a method of encoding information where the instantaneous frequency of a pulse train carries the signal's information. PFM is of particular interest to those working towards interfacing prosthetic devices directly with the human nervous system. In this paper, we consider the effects of directly implementing PFM with a digital microprocessor. We consider three digital PFM algorithms: two are deterministic, and the third has a probabilistic nature that has desirable time-averaged and ensemble behavior. For each algorithm, we analytically bound the error between the desired pulse frequency and the actual frequency output by the microprocessor. We aim to provide tools for the design and analysis of closed-loop neuroprosthetic systems containing PFM