The development of an efficient numerical approach for the generation of a wide range of heterogeneous microstructures models with the application of the lean workflow concept is presented in the paper. First, the idea and implementation details of the developed cellular automata-based computational library allowing the development of digital material representation models within a workflow are presented in the paper. Such an approach provides the desired flexibility in the generation of various digital models of heterogenous microstructures. Therefore, the proposed library is mostly implemented within the object-oriented C + + programming language with the assumption of modularity. In this case, the main part of the application consists of classes and methods, which can be treated like base elements to be inherited and extended in other libraries. Each additional dynamic link library implements particular algorithms for the generation of specific microstructure features in the digital model within the unified data structures that allow the application of the workflow concept. The set of developed libraries and their assumptions are described as case studies to show the capabilities of the presented solution. Finally, examples of practical applications of the developed library in the full-field numerical simulations of complex material deformation are presented at the end of the paper.
1 September 2018 in Archives of Civil and Mechanical Engineering
Herein, we evaluate the nanoindentation test capabilities in the determination of flow stress characteristics of the matrix material in porous sinters. The Distaloy AB sample with 15% porosity after the sintering operation is selected as a case study for the investigation. 2D and 3D imaging techniques are employed first to highlight difficulties in identifying reliable nano hardness measurement zones for further properties evaluation. Then, nanoindentation test results are acquired with Berkovich tip pressed under various loads at different locations in the sample. Systematic indentations in the quartz sample are used as a cleaning procedure to minimize the effect of the possible build-up around the indenter tip. The representative indentation load range is selected based on the extracted material characteristics. With that, the stress–strain response of the sinter matrix material is identified. The reliability of the determined flow stress curve is confirmed with the use of conical nanoindentation measurement results and finite element simulations. Obtained results show that it is possible to calculate reliable flow stress characteristics of the matrix in the porous samples, with the assumption that experiments under various loading conditions and from various locations in the matrix are performed. It is also pointed out that various indentation loads should be used to eliminate the influence of the pile-up or scale effects that affect the overall material response.
1 June 2017 in Archives of Metallurgy and Materials
Development of the Digital Material Representation (DMR) model, based on 3D reconstruction algorithm and serial sectioning, is the main goal of the present paper. Details on the serial sectioning and image processing algorithms are presented first. Serial sectioning is realized on the basis of light microscopy (LM). Then concept of 3D reconstruction and developed algorithms are presented. Two approaches, based on shape coefficients and the flood fill algorithms, are developed to identify corresponding features on subsequent 2D images. Then, the interpolation algorithm to reconstruct 3D volume between 2D images is presented. Finally, obtained 3D model is an input for finite element mesh generation software for subsequent finite element calculations.
31 January 2025 in International Journal of Material Forming