22 November 2024 in Journal of Vibration and Control
This study investigates the external rotor permanent magnet synchronous motor with fractional slot concentrated windings. A comprehensive multi-physics model is utilized to analyze electromagnetic force behaviors on permanent magnets induced by sinusoidal currents. The impact of cogging torque on motor performance and electromagnetic noise from the side cover is examined through finite element simulation. An analytical model is developed to account for slotting and pole-slot interaction effects, providing insights into the spatial distribution and frequency characteristics of electromagnetic forces on permanent magnets. An energy-centric approach is used to evaluate cogging torque and its influencing factors. The non-uniform distribution of electromagnetic forces on permanent magnets is considered, and electromagnetic nodal forces are integrated into the structural model. The radial vibration acceleration of the rotor’s external surface is computed using the Modal Superposition Method, while the Acoustic Boundary Element Method is employed to predict the acoustic radiation from the side cover and the pressure distribution in the external air domain. Simulation results show that slotting-induced electromagnetic forces significantly contribute to motor noise. Optimization of slot width reduces electromagnetic forces at modal frequencies, decreases cogging torque, and lowers overall sound pressure level, improving motor vibration and noise reduction capabilities while enhancing operational performance.
1 October 2025 in IEEE Transactions on Power Electronics
This study proposes a multiphysics coupling optimization methodology to mitigate electromagnetic noise and cogging torque in external rotor permanent magnet synchronous motors. A slot-pole interaction analysis model is developed, incorporating nonlinear magnetic permeability modulation effects, to elucidate the spatiotemporal distribution characteristics of electromagnetic forces and their resonance mechanisms with structural modes. A novel energy-based method for cogging torque calculation is introduced, achieving a 20% improvement in computational efficiency while maintaining numerical errors below 2% . Furthermore, a cylindrical shell vibration model based on nodal force mapping and a boundary element-based acoustic radiation prediction framework are established. Multiobjective optimization leveraging response surface methodology and a modified particle swarm optimization algorithm is employed to quantify the impact of temperature gradients on permanent magnet performance and nonlinear synergistic effects among parameters. Postoptimization results demonstrate a significant reduction in overall sound pressure level to 27.69 dBA under rated conditions and a 38.5% decrease in cogging torque, validating the effectiveness of the proposed electromagnetic-structural-acoustic codesign approach. This work provides a systematic framework for multiphysics collaborative optimization in high-performance motor design.
17 March 2026 in IEEE Transactions on Transportation Electrification
In this paper, a dynamic modeling and signal processing framework integrating Doppler compensation is proposed for the accurate prediction of broadband noise characteristics in external-rotor permanent magnet synchronous motors (ERPMSM). First, a multiphysics coupling model incorporating tangential electromagnetic forces is established, with its spatiotemporal distribution validated through finite element analysis. Subsequently, multi-channel synchronous signal acquisition is implemented using a uniform circular microphone array, combined with a time-varying spatial filtering and reordering strategy to dynamically correct spectral distortion induced by time-varying sound propagation paths. Furthermore, a boundary element method modified by a dynamic Green's function is employed to precisely characterize the radiation behavior of moving acoustic sources. Experimental results demonstrate that the proposed method significantly reduces sound pressure level prediction errors, enhances the identification accuracy of high-frequency harmonics, and maintains stable spatial directivity prediction capability under all operating conditions.