Alona Shpyh

Alona Shpyh

Auto-generated profile, based on publicly available information

Alona Shpyh

National Transport University

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 March 2021 in EUREKA: Physics and Engineering
Verified
Journal Article
Open access
PDF file
LFLiliia Frolova
Liliia Frolova
RSRoman Shevchenko
Roman Shevchenko
ASAlona Shpyh
Alona Shpyh
VKVadim Khoroshailo
Vadim Khoroshailo
YAYana Antonenko
Yana Antonenko
In this work, the optimal combinations of Al – Si in cast iron for cast parts for machine-building purposes were determined with the aim of subsequent selection of rational modes of modification and alloying, and the possibility of their implementation under industrial smelting conditions was checked. The graphical dependence Si=f (Al) is obtained, which is a set of optimal combinations of the content of Al and Si in cast iron, providing the maximum ultimate tensile strength UTS≈245 ... 334 MPa. The technological audit of the results of serial industrial smelting included the analysis of actual indicators, the calculation of sample distribution functions (mathematical expectation and dispersion) of the Al and Si content in the alloy, as well as the UTS value. The correspondence of the indicators of the content of Al and Si and the value of σ to the optimal values was assessed by testing the statistical hypotheses: H: M(Al)=Alopt, M(Si)=Siopt, M(σв)=σвopt.On the basis of the obtained results of the assessment of statistical characteristics and verification of hypotheses, it was established that at the chosen significance level α=0.05, the technological process of smelting satisfies the requirements of optimality in terms of the Si content, but in terms of the Al content, the technological process does not meet the requirements of optimality. The proposed procedure for choosing the optimal combinations of Al and Si makes it possible to choose the amount of correcting additives depending on the actual indicators of the chemical composition during the smelting process. To do this, it is necessary to assess the closeness of the actual composition to the optimal curve Si=f(Al) and choose the one that most satisfies the criteria of rationality. The latter can be the cost of ferroalloys, through which Al and Si are introduced

28 April 2022 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
AKAlexander Kanin
Alexander Kanin
AKAnna Kharchenko
Anna Kharchenko
VTVitalii Tsybulskyi
Vitalii Tsybulskyi
NSNatalia Sokolova
Natalia Sokolova
ASAlona Shpyh
Alona Shpyh
This paper reports a study into the main parameters of long-term contracts for the maintenance of roads. Weaknesses in existing methods and models of substantiation of the initial characteristics of contracts have been identified. It is established that the main reason for the transition to long-term contacts in the road sector is the need to improve the efficiency and effectiveness of road asset management. This determines the main goal to maintain the operational condition of all components of roads at a level that ensures the satisfaction of user requirements and contributes to the preservation of assets. A simulation model for substantiating the parameters of long-term contracts for road maintenance has been built, which makes it possible to simulate forecast assessments of the characteristics of contracts. Underlying this study is the Monte Carlo method, as well as the triangular law of distribution, models of deterioration and restoration of the condition of road elements. Taking into consideration these models, it was established that the error in justifying the parameters of long-term contracts according to the devised method is up to 10 %. The devised model was tested by applying the developed original LTCsimula program using an example of the section of a motorway with a length of 87.3 km with an average level of requirements. According to the results of the test, the assessment of the laws of distribution of value, as well as the amount of deductions and profits of a long-term contract, was carried out. The calculation results demonstrated the model’s capability to determine the strategies for the maintenance of roads, taking into consideration the risk of implementing a contract with an error of up to 3.9 %. The practical use of the devised simulation model makes it possible to improve the efficiency of operational maintenance of roads, as well as to save from 10 % to 40 % of the cost of road maintenance

1 January 2023 in The National Transport University Bulletin
Verified
Journal Article
Closed access
SOSlavinska O
Slavinska O
BLBondarenko L
Bondarenko L
SVStozhka V
Stozhka V
SASevostianova A
Sevostianova A
SAShpyh A
Shpyh A

28 November 2024
Verified
Book
Closed access
NUNational Transport University
National Transport University
ОСОлена Славінська
Олена Славінська
АБАндрій Бубела
Андрій Бубела
ОУОлена Усиченко
Олена Усиченко
ВСВіталій Стьожка
Віталій Стьожка
АКАрсен Клочан
Арсен Клочан
5Монографія містить аналіз вимог щодо габаритно-вагових параметрів великовагових транспортних засобів, результати досліджень пропускної здатності доріг і мостів, а також динамічних факторів впливу великовагового рухомого складу. Розроблено сучасні моделі навантаження мостів з урахуванням фактичного складу транспортного потоку. Видання буде корисним для фахівців, що займаються проєктуванням, будуванням, утриманням і ремонтом автомобільних мостів, а також для здобувачів вищої освіти за спеціальністю «Будівництво та цивільна інженерія».

30 April 2026 in Scientific conference of teaching staff, postgraduates, students and staff of separate structural units of the university
Verified
Journal Article
Closed access
NSNatalia Sokolova
Natalia Sokolova
ASAlona Shpyh
Alona Shpyh

1 January 2024 in Automobile Roads and Road Construction
Verified
Journal Article
Closed access
LBLiudmyla Bondarenko
Liudmyla Bondarenko
VSVitalii Stozhka
Vitalii Stozhka
ASAlina Sevostianova
Alina Sevostianova
ASAlona Shpyh
Alona Shpyh
OUOlena Usychenko
Olena Usychenko
Annotation: The study presents the results of the research of the impact of traffic intensity and traffic flow composition on the capacity of highways and bridge crossings based on mathematical and numerical modeling methods. The main factors affecting the capacity of highways and bridge crossings have been identified. The methodology for determining the level of traffic and capacity of highways approved by the State Service of Highways (now the Restoration Agency) was adopted as the main calculation basis for numerical modeling. Also, for calculations, updated statistical data, given in open literary sources, were used. 11 test options with different composition of the traffic flow were considered: from 0% to 100% of the share of passenger cars in the composition of the traffic flow. The average speed of the traffic flow was determined depending on the geometric parameters of the road - the radii of the horizontal curves in the plan and the longitudinal slope of the carriageway. It is shown that the average speed of the traffic flow increases with an increase in the value of the radius of the horizontal curve and with a decrease in the value of the longitudinal slope of the carriageway of the road, which is due to the improvement of traffic safety conditions and the possibility of moving vehicles at higher speeds. Also, the results of the numerical modeling showed an increase in the average speed of the traffic flow with an improvement in the level of coverage of the road (bridge crossing). It is shown that an increase in the share of cars in the traffic flow leads to an increase in the average speed of the entire traffic flow, which is explained by their more "compact" dimensions, compared to trucks, buses and road trains. The smallest practical carrying capacity of a highway or bridge crossing corresponds to a column of cars at the speed of free movement. The highest practical throughput corresponds to the traffic intensity at the minimum interval (optimal speed). Also, with an increase in the traffic flow of trucks and large-sized vehicles, the capacity of the road decreases. This determines the relevance of research in the direction of developing load models based on the actual parameters of heavy-duty rolling stock when determining the load-carrying capacity of highways and overpasses. Key words: highway, bridge crossing, throughput, mathematical modeling.