Electrochemical hybridization sensors have been explored extensively for analysis of specific nucleic acids. However, commercialization of the platform is hindered by the need for attachment of separate oligonucleotide probes complementary to a RNA or DNA target to an electrode's surface. Here we demonstrate that a single probe can be used to analyze several nucleic acid targets with high selectivity and low cost. The universal electrochemical four‐way junction (4J)‐forming (UE4J) sensor consists of a universal DNA stem‐loop (USL) probe attached to the electrode's surface and two adaptor strands (m and f) which hybridize to the USL probe and the analyte to form a 4J associate. The m adaptor strand was conjugated with a methylene blue redox marker for signal ON sensing and monitored using square wave voltammetry. We demonstrated that a single sensor can be used for detection of several different DNA/RNA sequences and can be regenerated in 30 seconds by a simple water rinse. The UE4J sensor enables a high selectivity by recognition of a single base substitution, even at room temperature. The UE4J sensor opens a venue for a re‐useable universal platform that can be adopted at low cost for the analysis of DNA or RNA targets.
24 October 2024 in Propellants, Explosives, Pyrotechnics
In early 2025, an improvised explosive known as R-Salt (hexahydro-1,3,5-trinitroso-1,3,5-triazine), was recovered from multiple improvised explosive devices in a terrorist attack in New Orleans, USA. R-Salt is not commonly included in canine training kits and its odor profile has not yet been characterized, potentially affecting its detection by explosives detector canines (EDCs) in operational settings. This study provides an in-depth characterization of the headspace composition of R-Salt using thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS) to provide methodology for future canine (K9) training aid development and evaluation. This work includes thorough characterization of the crude and recrystallized bulk material as well as methodical optimization of TD parameters, flow rates, and sample collection time used for headspace analysis. The odor profile of a laboratory grade batch of R-Salt before (R-Salt-C) and after recrystallization (R-Salt-R) was characterized at room temperature for comparison and to establish a baseline odor profile. The odor profile of R-Salt-R included two compounds, R-Salt and a potential degradant, while the R-Salt-C contained an additional 7 compounds, one of which is attributed to NO2 off-gassing. In addition, the vapor pressure was determined to be 6.51 × 108 atm for R-Salt-R using thermal gravimetric analysis whereas the vapor pressure of R-Salt-C was 3.15 × 10−7 atm, indicating the presence of additional volatile contaminants. The extensive characterization provided in this study can be used to evaluate EDC detection of R-Salt and the methodology can be utilized across the explosive forensics community for R-Salt headspace characterization, evaluation and development of K9 training aids.
Thermal desorption-GC/MS was used to characterize TNT odor signatures across morphologies, identifying subtle chemical differences that may influence canine detection and the representativeness of training aids.