1 January 2016 in ACI Structural Journal
18 February 2016 in Structural Concrete
5 May 2021 in Structural Concrete
Lately, there has been increasing demand for structural solutions and building technologies with minimalized CO2 footprint. One way to approach the carbon neutrality is through reuse of structural components. In order to enable economic reuse of precast concrete elements, their connections must be designed to allow an effortless dismount. While dismount ability provides additional value to the structure, it cannot have a negative impact on other crucial properties of the connection. One of those properties is the load‐transfer capacity. While the impact of improved demountability on the load‐transfer of axial forces is negligible, the capacity of such joints to transfer shear forces can be questioned, as it is often assumed to rely on the friction generated along compressed section. This paper studies the effects of an improvement of demountability on the shear‐transfer system in a bolted joint of precast concrete columns.
1 January 2012 in Procedia Engineering
1 January 2016 in Procedia Engineering
25 August 2012 in Procedia Engineering
The design specifications of composite truss, included in the American standard (ASCE), are not covered in the European standards (Eurocodes). In this study, to investigate the behavior of the composite trusses, a finite element (FE) model is developed using the software CAST3 M. The influence of various parameters, such as the diameter of the shear connectors, the top chord section, the degree of connection, and the material characteristics, on the behavior of the composite truss and the shear connectors are analyzed. The model shows that the shear connection in the steel-concrete composite truss reduces its deflection by approximately 50% in comparison to the steel truss. The significant influence of the top chord section on the shear forces in the shear connectors was observed.