Near-water hover is a critical operating condition for air–water cross-media UAVs; rotor downwash deforms the free surface while the redirected wake loads the airframe. We examine this coupled response for a tandem twin-rotor vehicle in open air (OA), above rigid ground (GE), and above initially calm water (WSE). Compressible unsteady Reynolds-averaged Navier–Stokes calculations with a volume-of-fluid interface model were performed at 5000 rpm over 0.35 ≤ h/D ≤ 2.00. At h/D = 0.35, mean rotor thrust exceeded OA by 8.71% in GE and 7.51% in WSE. The vertical airload on the non-rotating airframe changed from a 26.986 N download in OA to uplifts of 8.712 N and 6.299 N, raising the net upward aerodynamic force from 131.94 N to 181.48 N and 177.15 N, respectively. Over water, depressions and raised rims reshaped the near-interface wake; the normalized surface excursion decreased from 0.1313 at h/D = 0.35 to 0.0118 at h/D = 2.00. The airframe-load reversal contributes more to the near-surface force gain than the rotor-thrust increment, making the complete-vehicle force balance essential to near-water assessment.
The performance of the aircraft anti-skid braking system is critical to the ground operational safety of an aircraft. Conventional Pressure Bias Modulation (PBM) can suffer from deep skidding under low runway friction coefficients or low aircraft speeds. To address these issues, a composite control strategy based on Gaussian Quantum Particle Swarm Optimization (GQPSO) is proposed. This strategy employs the GQPSO algorithm for offline Proportional–Integral–Derivative (PID) parameter optimization, followed by real-time adaptive scheduling through a lookup table to accommodate varying speed domains and runway conditions. Simultaneously, by integrating the main-wheel dynamics model and friction characteristics, a runway identification function based on a Back Propagation Neural Network (BPNN) is designed to provide runway status information. The stability of the controller is verified via phase-plane analysis and Monte Carlo simulation. Subsequently, comparative Hardware-in-the-Loop (HIL) tests are conducted among PBM, PSO-PID, and the proposed GQPSO-PID controller under various runway conditions. The experimental results demonstrate that this composite controller can adapt to different speed domains and runway conditions, stably track the target slip ratio, effectively suppress skidding, and significantly improve braking efficiency, as well as exhibiting excellent robustness and control performance.