We have generated a single-wavelength data signal with a data capacity of 5.1 Tbit/s. The enabling techniques to generate the data signal are optical time-division multiplexing up to a symbol rate of 1.28 Tbaud, differential quadrature phase shift keying as data format, and polarisation-multiplexing. For the first time, error-free performance with a bit error rate less than 10−9 is demonstrated for the 5.1 Tbit/s data signal. This is achieved in a back-to-back configuration using a direct detection receiver based on polarisation- and time-demultiplexing, delay-demodulation and balanced photo-detection.
We report the first demonstration of error-free 640 Gbit/s demultiplexing using the Kerr non-linearity of an only 5 cm long chalcogenide glass waveguide chip. Our approach exploits four-wave mixing by the instantaneous nonlinear response of chalcogenide. Excellent performance is achieved with only 2 dB average power penalty and no indication of error-floor. Characterisation of the FWM efficiency for the chalcogenide waveguide is given and confirms the good performance of the device.
A 1.28 Tbaud data signal is demonstrated, which is the highest symbol rate yet reported. The data signal is formed by optical time-division multiplexing of 128 data channels at 10 Gbit/s OOK in a single polarisation. The generated 1.28 Tbit/s data signal is demultiplexed in a nonlinear optical loop mirror, resulting in error-free performance with a BER<10−9 for all 128 demultiplexed channels.
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
1 March 2012 in IEEE Journal of Selected Topics in Quantum Electronics
This paper reports on the utilization of the time-domain optical Fourier transformation (OFT) technique for serial-to-parallel conversion of optical time division multiplexed (OTDM) data tributaries into dense wavelength division multiplexed (DWDM) channels. The OFT is implemented by using a dispersive medium followed by phase modulation; the latter being achieved by a four-wave mixing process with linearly chirped pump pulses. Both numerical and experimental investigations of the OTDM-to-WDM conversion technique are carried out. Experimental validations are performed on 320- and 640-Gbit/s OTDM data with error-free performance.
30 April 2019 in IEEE Photonics Technology Letters
This paper proposes an alternative approach to the signal processing of temperature measurements based on Fiber Bragg Gratings (FBG) using the machine learning tool Gaussian Process Regression (GPR). Experimental results show that for a majority of the cases under consideration the reported technique provides a more accurate calculation of the temperature than the conventional methods. Furthermore, the GPR can give the uncertainty of an estimate together with the estimate itself, which for example is useful when it is important to know the worst case scenario of a measurand. GPR also has the potential to improve the measurement speed of FBG based temperature sensing compared to current standards.