Sheng Hu

Sheng Hu

Auto-generated profile, based on publicly available information

Sheng Hu

Texas A&M Transportation Institute, Bryan, TX

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 April 2023 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Open access
SHSheng Hu
Sheng Hu
FZFujie Zhou
Fujie Zhou
TSTom Scullion
Tom Scullion
EFEmmanuel Fernando
Emmanuel Fernando
MSMena Souliman
Mena Souliman
Pavement skid resistance is critical for public safety, especially in wet-weather conditions. In Texas, as the population grows and the likelihood of wet-surface crashes and fatalities increases, the use of Surface Aggregate Classification A (SAC-A) aggregate has significantly increased each year to improve pavement skid resistance. Texas Department of Transportation specifications allow for the use of reclaimed asphalt pavement (RAP) to conserve natural resources and save costs. However, the impact of RAP on the skid resistance of the surface mixture was unknown or not quantitatively studied. Currently, all RAPs are categorized as Surface Aggregate Classification B aggregate in Texas. This study proposed a method of quantitatively evaluating the skid resistance of RAP aggregate using a dynamic friction tester (DFT). The DFT test results (friction numbers) for RAP and raw aggregate were combined according to their gradations and stockpile percentages in the mixture design, called “blended-DFT,” to predict the skid resistance of the surface mixture. Twenty asphalt mixtures with different RAP types and percentages were designed and tested to study the impact of RAP on mixtures’ skid resistance. The researchers found that adding high skid-resistant RAP increases the mixture slab DFT values, while low skid-resistant RAP decreases the slab DFT values. This confirms the potential of using high skid-resistant RAP to conserve SAC-A raw aggregate resources. A preliminary DFT threshold for RAP to be rated as SAC-A aggregate was proposed in this study.

1 December 2022 in Journal of Transportation Engineering, Part A: Systems
Verified
Journal Article
Closed access
PDF file
HJHameed Jehanfo
Hameed Jehanfo
SHSheng Hu
Sheng Hu
IKIoannis Kaparias
Ioannis Kaparias
JPJohn Preston
John Preston
FZFujie Zhou
Fujie Zhou
ASAlan Stevens
Alan Stevens
Previous studies on connected autonomous vehicles (CAVs) examined pavement performance and lane widths separately and in isolation, and without consideration for roadworks conditions. Hence, this study presents a holistic, optimal highway design solution for connected autonomous trucks (CATs) by testing pavement failure and traffic performance under different cross-sectional configurations incorporating a dedicated CAT lane for both normal and temporary traffic management (TTM) arrangements. Firstly, a dual three-lane motorway (D3M) was selected as a base case site. Next, previous research on substandard lanes was used to produce five nonstandard cross-section alternatives, which were then modeled using commercially available software. Capital investments to implement the alternatives were calculated by applying established industry construction cost models. Each cross-section was then subjected to different CATs penetration rates (PRs) and wheel wander regimes, and their pavement structural deterioration analyzed using the Texas Mechanistic-Empirical Asphalt Concrete Pavement Design and Analysis System (TxME) software. From this, maintenance frequencies and costs were determined. The study estimated delays and delay costs during TTM over a 20-year design period. Finally, initial investment, rehabilitation and delay costs were combined. It was found that the lowest life-cycle cost (LCC) of £19,091,470 occurred for high (80%) CAT PR operating under Standard D3M, whereas the highest LCC of £152,728,100 was also for high PR, but under Substandard D4M. Optimal LCC was found to change with different PRs. Hence cross-sections should be dynamically modifiable, given the anticipated gradual increase in PRs over time.

1 December 2017 in Journal of Performance of Constructed Facilities
Verified
Journal Article
Closed access
SHSheng Hu
Sheng Hu
IBImad Basheer
Imad Basheer
JLJoe Leidy
Joe Leidy
FZFujie Zhou
Fujie Zhou
This paper reviewed mechanistic-empirical (ME) design and analysis frameworks and identified a weak link: a cracking amount model connecting pavement damage (predicted from mechanistic-empirical analyses) and asphalt cracking distresses. The importance of cracking amount models has not received the attention it deserves. After reviewing all the available existing cracking amount models in the technical literature, a universal cracking amount model was proposed for fatigue and reflective cracking. The new model governed by two parameters (α and β ) fits naturally into the general ME design system. Parameter α is related to pavement life and can be directly predicted from ME analysis because it is the time (or number of load applications) when accumulated pavement damage reaches 100%. Parameter β is a shape parameter function of traffic, environment, subgrade, pavement structure and material properties, and existing pavement surface condition when considering asphalt overlays. Because parameter α can be determined by the ME design and analysis system, t , the key parameter in the new universal model, is to quantify parameter β . Both fatigue cracking data in the long-term pavement performance database and asphalt overlay reflective cracking data in Texas were used in this paper to demonstrate and calibrate the new model and develop the β functions. In this paper, different β functions were established for fatigue and reflective cracking. Further model validation and calibration with more field data, varied traffic load spectra, different environmental conditions, and different materials are still required.

29 August 2022 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
EFEmmanuel G. Fernando
Emmanuel G. Fernando
SHSheng Hu
Sheng Hu
WCWilliam Crockford
William Crockford
Ride quality, safety, and tire pavement noise are functional performance measures of concern to highway motorists. Owing to the significant influence of surface macrotexture on wet-weather skid resistance, splash and spray, and highway traffic noise, a need exists for reliable and repeatable methods to measure pavement macrotexture over the road network. To address this need, the National Cooperative Highway Research Program sponsored a project that developed draft protocols for test methods, equipment specifications, and data quality assurance practices for network-level macrotexture measurement. The project conducted three field experiments to evaluate available technologies in regard to repeatability, agreement, and accuracy. This paper focuses on the field experiment conducted at the Texas A&M University RELLIS Campus, which aimed to validate macrotexture measurements from high-speed laser equipped devices suitable for network-level macrotexture data collection and processing. To accomplish this objective, the RELLIS experiment included test speed and laser exposure time in the test matrix, fabricated a measurement beam to collect static reference texture data using a high-resolution laser, and compared texture measurements from different devices with corresponding reference values. This paper presents the findings and conclusions drawn from the RELLIS experiment.

14 July 2021 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
PDF file
EFEmmanuel G. Fernando
Emmanuel G. Fernando
EAEdith Arambula
Edith Arambula
SHSheng Hu
Sheng Hu
WCWilliam Crockford
William Crockford
Aggregate shape, texture, and angularity are important physical properties for the development of high-quality adhesive systems with asphalt binder, and a good quality aggregate skeleton in asphalt and concrete mixtures. These properties are commonly measured using systems that employ images of aggregate samples taken with a digital camera. In practice, macro-texture measurements are commonly conducted nondestructively at highway speed using high-frequency lasers. There is a need to investigate the application of these optical sensors for measuring aggregate texture in the laboratory. Researchers used a laser-based scanning system to test aggregates from five sources before and after Micro-Deval abrasion. The aggregate specimens were embedded in a ring-shaped polyester material and tested with the aggregate ring texturing system (ARTS) along with the dynamic friction tester (DFT) to characterize micro-texture and frictional properties. Researchers analyzed the laboratory test data to evaluate the relationship between DFT friction at 60 km/h (DFT60) and the micro mean profile depth obtained with the ARTS. This analysis showed that the igneous and gravel aggregates had better micro-texture and frictional characteristics compared with the dolomite and limestone aggregates. The results from this implementation project showed the potential for using the ARTS to improve the Texas Department of Transportation’s existing surface aggregate classification system. Further testing is needed to characterize aggregates from other sources and compile a more comprehensive and representative database with which to establish meaningful aggregate classification criteria that include surrogate statistics for expected field performance.

1 September 2022 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
PDF file
XLXi Luo
Xi Luo
SHSheng Hu
Sheng Hu
FZFujie Zhou
Fujie Zhou
WCWilliam Crockford
William Crockford
PKPravat Karki
Pravat Karki
Asphalt pavement rutting is caused primarily by shear stresses induced by heavy truckloads. Many tests have been developed to determine asphalt mix rutting potential. However, due to limited correlation with field rutting performance, long testing hours, and difficulties of sample fabricating, no test can be used as a fast and straightforward assessment tool for quality control or quality assurance/acceptance (QC/QA) purpose. In this study, a shearing fixture was developed to investigate the shear rutting potentials of the asphalt mixture more easily and rapidly. An analytical solution was derived from the mechanical analysis. With this solution, the stress distributions of the specimen under the shear loading were analyzed and plotted. These stress distribution plots are also compared with those under the other loading fixtures, such as the indirect tension (IDT) fixture and Marshall fixture. The comparison indicates that the developed shearing fixture is good at inducing shear stress to the specimen and manifesting the shear rutting mechanism. Several scenarios were evaluated by varying the loading fixture configurations, such as the bottom support arc length and angle. The impacts of these configuration elements on the stress distribution were investigated. Laboratory-mixed and laboratory-molded specimens were tested using the shearing fixture, and the test results show high repeatability. The mechanical analysis and experiments indicate that the new shear rutting test is very promising for evaluating the asphalt mix rutting potential quickly and straightforwardly.