Free conductive particle is one of the main insulation threats to GIS. However, due to the extremely strong variety and randomness of particle behaviors, it is difficult to reproduce the particle-induced-breakdown in GIS, and the breakdown mechanism with multiple-micro-particle coexisting, are unclear and need further investigations. In this research, the movement pattern of multiple particles in a 1100 kV GIS was firstly analyzed, and found that the slight axial electric field could drive particles to move towards the convex side of the basin insulator, eventually causing an accumulation in a region. “Multi-particle-in-series” (MPIS) phenomenon was observed, with a low probability, but inevitably in the long run. Secondly, the physical model of multiple-particle-induced breakdown was established based on the streamer criteria, and a step-by-step discharge during MPIS process was responsible for the breakdown. Lastly, a 252 kV GIS was employed to act as a scaled model to equivalently simulate the electric field in 1100 kV GIS and experimentally study the particle-induced breakdown properties. A single particle in each state and position was difficult to induce the breakdown, while MPIS triggered several breakdowns, although at a very low working coefficient, which eventually verified the breakdown mechanism induced by MPIS in GIS.
4 January 2024 in IEEE Transactions on Power Delivery
Metal particles are. a great threat to GIS insulation, especially latent metal particles with higher densities, which are difficult to detect and provide early warnings before sudden faults. Thus, the detection of particles in predelivery or handover test stage is necessary and urgent. This paper proposed a new method by applying mechanical vibration to excite latent particles in power-frequency withstand-voltage test (PVT) to improve the detection effectiveness. In a scaled GIS, the charging and moving properties of latent particles under power-frequency voltage and impact vibration were investigated by experiment and simulation. Results showed that impact vibration could dramatically decrease particle lifting field by over 50% and trigger continuous bouncing under a lower electric field, releasing detectable acoustic signals. Validation tests were also conducted in a 330-kV GIS. In routine PVT, the critical detectable thickness of silver disc-type particles was ∼0.1 mm, while an 80 g--20 ms impact vibration could expand critical thickness to ∼0.4 mm, greatly enlarging the detectable parameter domain. Finally, the propagation and attenuation of impact vibration in different GIS components were studied, and the application method was discussed. The proposed new method affiliated to PVT could improve the detection effectiveness of latent particles and thus the insulation reliability of GIS
A plasma jet-triggered gas switch (PJT-GS) has been developed as an important piece of equipment to operate in an 800 kV ultra-high voltage direct current transmission system (UHV DC) to achieve grid system protection and control. The crucial factors that would affect its operational performance, such as the current level the PJT-GS could withstand and the gas gap distance between the two rotating electrodes, are comparatively studied in the present work by analysing the arc dynamic characteristics. The rotating electrode used in the PJT-GS is designed with a helical-slotted structure, and the arc can be rotated circularly driven by the produced transverse magnetic field (TMF) along the electrode edge. The objective of such research is to provide a thorough study of the arc dynamic behaviour during the current flowing process of the PJT-GS and also to characterise the physical mechanism that affects the arc rotation and the PJT-GS operation performance. The magnetohydrodynamic-based (MHD) approach is applied by establishing a 3D arc model. Following such a study, the variation of arc characteristics under different operation conditions could be thoroughly determined and it also could provide the guidance for the PJT-GS optimum design reasonably to support its corresponding engineering applications.